Parameter Settings - Bushnell 119446C Instruction Manual

Parameter
Field Scan
Video Sound
(only affects
video clips)
Default Set
20
Settings
(Bold=default)
On, Off
On, Off
Cancel,
Execute
Description
Turns Field Scan (Time Lapse)
recording mode on/off. Pressing OK
with On selected will go to the Set
Field Scan screen, which allows you
to set the Start and Stop times in
hours (0-24) and minutes (00-59).
This is setting the time each day for
recording to begin and end (24 -hr
clock, so 13:00 hours=1PM). Use
the RIGHT key to step through the
fields, and use UP/DOWN to change
the settings. After you set the "Stop"
minutes, the next press of the RIGHT
arrow key will jump to the screen for
setting the Interval (how often the
Trophy Cam will wake up and record).
You can select 60, 30, 15, 5 or 1
minutes (default is 5M).
Select "On" to record audio along
with the video when the camera is set
to video mode (saved file sizes will be
slightly larger).
Select "Execute" and press OK to
restore all parameters to the original
factory default settings. If the camera
is behaving oddly and you think you
may have changed the setting for
something accidently (but aren't
sure which one), this will reset all
parameters to their most commonly
used or "generic" settings.