Advertisement
Quick Links
Setting up the Linksys WRT32X
Share the Article:
The Linksys WRT32X AC3200 Dual-Band Wi-Fi Gaming Router with Killer Prioritization
Engine uses the Killer™ Prioritization Engine to provide the best home routing solution for serious online
gaming. It is built with an enterprise-grade hardware to deliver the fastest wired and wireless speeds for your
network.
This article will guide you on how to set up the Linksys WRT32X using a computer, tablet or
smartphone.
Before you begin:
Make sure the internet connection from your internet service provider (ISP) is working.
If you are replacing your existing router, make sure to disconnect it and move it out of the
way.
Have your new router's default Wi-Fi settings ready. The default Wi-Fi Name and Wi-Fi
Password of the router are located at the bottom of the router.
If you have a DSL connection, have your DSL username and password ready.
Step 1:
Identify and prepare your equipment for setup.
Modem only: If you have a separate modem and standalone router, disconnect and
remove your old router. Powercycle your modem.
Modem router: If you have an all-in-one modem router, leave it connected.
Step 2:
Connect the antennas to your router while it is turned OFF.
Step 3:
Connect an ethernet cable to the internet port of the router. Connect the other end of the ethernet
cable to the modem. Power ON the router and wait until the power light is solid. To learn about
the light behavior of your router, click here.
Advertisement
Related Manuals for Linksys WRT32X
Summary of Contents for Linksys WRT32X
- Page 1 It is built with an enterprise-grade hardware to deliver the fastest wired and wireless speeds for your network. This article will guide you on how to set up the Linksys WRT32X using a computer, tablet or smartphone. Before you begin: ...
- Page 2 Step 4: If you are using a mobile device, connect to the default Wi-Fi of the router (LinksysXXXXX, where XXXXX indicates the last five digits of the router's serial number). Enter the default Wi-Fi Password that is located on the label underneath the router. NOTE: If you are using a computer that is hardwired, connect an ethernet cable to a numbered port on the router and connect the other end of the cable to the computer.
- Page 3 Read the Terms and Conditions and scroll down to click or tap Agree. Step 8: Scroll down to click or tap Next. Step 9: The wizard will verify your internet connection. If a DSL connection is detected, you will be prompted for your DSL credentials.
- Page 4 Enter your DSL credentials then click or tap Next. NOTE: If at any time the wizard fails to detect a connection and following the troubleshooting steps provided does not resolve the issue, click or tap on I’d rather continue without an internet connection to complete the wizard without an internet connection.
- Page 5 Step 11: Create your own Wi-Fi Name and Password. NOTE: By default, the 2.4 GHz and 5 GHz bands share the same Wi-Fi Name and Password. If you want to customize each band, click or tap Give my Wi-Fi bands different names.
- Page 6 Step 12: Create your own router Admin Password and an optional Admin Password Hint. Click or tap Next. Step 13: Connect to your new Wi-Fi Name on your computer or mobile device and then click or tap Next on the wizard.
- Page 8 NOTE: If you are using a computer wired into the router, just click or tap Next. If you are using a wireless device, the Next button will become available once your device has connected to the new Wi-Fi Name. Step 14: Enter your Email Address to register the router.
- Page 9 You have now successfully set up your Linksys WRT32X. To know how to set up your Guest Access, click here.
Need help?
Do you have a question about the WRT32X and is the answer not in the manual?
Questions and answers