Dell PowerVault MD3220i Deployment Manual page 40

Dell PowerVault MD32xxi Configuration Guide for VMware ESX4.1 Server Software
In this example we see that iSCSI1 is vmk0, iSCSI2 is vmk1, iSCSI3 is vmk2 and iSCSI4 is vmk3. This is also
information that we need to note.
We can also see this in the CLI by using the following command:
esxcfg-vmknic –l
The output will look similar to this:
Interface Port Group/DVPort IP Family IP Address
Netmask Broadcast MAC Address MTU TSO MSS
Enabled Type
vmk0 iSCSI1 IPv4 10.10.5.173
255.255.255.0 10.10.5.255 00:50:56:7b:d8:3e 9000 65535 true
STATIC
vmk1 iSCSI2 IPv4 10.10.5.174
255.255.255.0 10.10.5.255 00:50:56:7e:ae:80 9000 65535 true
STATIC
vmk2 iSCSI3 IPv4 10.10.5.175
255.255.255.0 10.10.5.255 00:50:56:74:a4:e0 9000 65535 true
STATIC
vmk3 iSCSI4 IPv4 10.10.5.176
255.255.255.0 10.10.5.255 00:50:56:70:80:a7 9000 65535 true
STATIC
vmk4 iSCSI5 IPv4 10.10.5.177
255.255.255.0 10.10.5.255 00:50:56:77:f2:64 9000 65535 true
STATIC
vmk5 iSCSI6 IPv4 10.10.5.178
Page 38