Maddak ABLEWARE Secure-Bolt 72579-0002 Instructions

I N S T R U C T I O N S
Elevated Toilet Seat
Secure-Bolt
1. Remove existing seat and lid from the
toilet. Be sure to not damage any of the
parts. The seat and lid can be used with
the Secure-Bolt
2. Place the elevated seat (D) on the toilet
making sure to line up the holes.
3. Place the regular toilet seat over the
elevated seat (D).
4. Hold the spacer (B) under the bolt
hole and guide the bolt (A) through
the regular toilet seat and the elevated
seat (D).
5. Repeat step 4 with the remaining bolt
(A) and spacer (B).
6. Place the plastic nut (C) on the end of
the bolt (A) and tighten. Repeat for the
other plastic nut (C) and bolt (A).
7. If a closed front is desired, slide on the
filler block (E) in the open front of the
elevated seat (D).
6 INDUSTRIAL ROAD • PEQUANNOCK, NJ 07440-1993 USA
973-628-7600 •
fax
972579200
Secure-Bolt
™
Elevated Toilet Seat with Closed Front Adapter
™
Elevated Toilet Seat.
973-305-0841 •
email
72579-0002
custservice@maddak.com • www.maddak.com
™
1109