Victor M2524S Instructions

Victor® Electronic Mouse Trap
Instructions
To Set & Place the Mouse Traps:
1. Be sure the trap is in the "OFF" position
2. Insert a small amount of peanut butter in the back of
the kill chamber against the access holes
3. Open battery compartment and properly insert
batteries 4 "AA".
4. Identify location with mouse activity. Place trap where
activity has been seen.
5. Turn switch to "On." Green light will flash once. Trap is
working.
6. Once caught, dispose of rodent in trash receptacle.
CAUTION: Inappropriate use of this product may
cause electrical shock, or serious injury. See
product warning for additional details.