Rago FABRICATION R1017T4RUMSP-DM Installation Manual

MOLLE STORAGE PANEL SYSTEM | PAIR
2010-2023/TOYOTA 4RUNNER
R1017T4RUMSP-DM
WARNINGS/CAUTIONS BEFORE STARTING INSTALLATION
-BEFORE YOU INSTALL THIS KIT-
Read and understand all instructions, warnings,
cautions, & notes contained in this installation
instruction guide. Consult your vehicle owner's
manual for proper disconnection of electrical and
lifting of vehicle if required for installation of this
product.
This install may require some technical skills and
knowledge of basic mechanical work. If you do not
feel that you are capable of performing this install
please take this product to a trained professional.
After reading this guide please contact us with any
questions or concerns before installing product.
INSTALLATION GUIDE
Customer Service: 830-896-7571
Rago Fabrication is not responsible for any bodily
injury or harm to you or your vehicle as a result of an
improper install.
Proper installation of this kit required knowledge of
the factory recommended procedures for removal
and installation of original equipment components.
We recommend that the factory shop manual and
any special tools needed to service your vehicle
be on hand during the installation. Installation
of this kit without proper knowledge of the
factory recommended procedures may affect the
TOOLS REQUIRED
- 10mm, 7/16 sockets
- 10mm, 7/16 wrenches
- Pushpin Puller or Flathead Screwdriver
- Phillips Screwdriver
- 5/32, 5mm Hex
SKILL
TIME REQUIRED
- Approximately 1 Hour
performance of these components and the safety of
the vehicle.
Inspect all contents of this package to make
sure product is not damaged and all installation
hardware has been included. If parts are missing
from kit, please be prepared to provide the following
information:
1. Name of purchase location
2. Bar Code on side of box
3. Date above bar code
4. Date inside box cover
*ALWAYS WEAR EYE PROTECTION
WHEN OPERATING POWER TOOLS*
LEVEL
- Easy