Related Manuals for GKB SP400
Summary of Contents for GKB SP400
- Page 1 Sandspreader Manual_Sandspreader_EN_2002 SP100-230-300-400 SPM 230-300-400...
- Page 2 2992 SP Barendrecht Nederland hereby declares that the GKB Sandspreader Type: SP100 - SP230 - SP300 - SP400 SPM230 - SPM300 - SPM400 to which this declaration relates are in conformity with the provisions of: Directive 2006/42/EC Machinery Directive At Barendrecht, 31/01/2023 T.J.W.
- Page 3 United Kingdom hereby declares that the GKB Sandspreader Type: SP100 - SP230 - SP300 - SP400 SPM230 - SPM300 - SPM400 to which this declaration relates are in conformity with the provisions of: Machinery (Safety) Regulations 2008 At Barendrecht, 31/01/2023 T.J.W.
-
Page 4: Table Of Contents
Adjusting the layer thickness ............................16 7.5. Other optimization possibilities ..........................18 7.6. Adjusting the additional conveyor belt ........................18 7.7. Operation of SP100 on a multifunctional working vehicle ..................20 7.8. Transport and storage ..............................21 MAINTENANCE ................................22 8.1. Lubrication schedule ..............................23 FAILURES .................................. -
Page 5: Foreword
These operating instructions must be read and understand by everyone who works, checks or maintains the machine in order to avoid risks and to avert dangers. CONTACT Manufacturer: Your personal Dealer: Your GKB dealer: GKB Machines B.V. Middelweg 1 2992 SP Barendrecht NETHERLANDS info@gkbmachines.com... -
Page 6: Warranty
the worker is king WARRANTY The statutory warranty period of two years from the invoice date applies to the machines. Warranty repairs or product replacements do not extend the warranty period of the machine or parts. The guarantee does not apply to items arising from normal wear and tear or ageing. -
Page 7: Safety Instructions
4. For optimum performance, the surface to be worked on must be flat and free of obstacles. 5. Only use parts and accessories specified by GKB. The installation and/or use of non-original parts and accessories may change or impair the specific characteristics of the machine. GKB is excluded from any liability for damage resulting from the use of non- original parts and accessories. -
Page 8: Driving On Public Roads And Tires
the worker is king 5.3. Driving on public roads and tires A European type approval is required before either the standard sand spreader or any of its variants can be used on a public road. Approved machines come equipped with an approval plate as well as a brake system and lighting. This approval is for any country within the E.U. -
Page 9: Product Specifications Sandspreaders
5.4. Product specifications Sandspreaders Eenheid SP100 SP100 SP230/EU SP300/ EU SP400/ EU assembled Dimensions Length 440 / 450 515 / 525 520 / 530 Width 190 / 215 190 / 215 235 / 255 Height 160 / 185... -
Page 10: Product Specifications Sandspreaders With Conveyor Belt
the worker is king 5.5. Product specifications Sandspreaders with conveyor belt Unit SPM230 / EU SPM300 / EU SPM400 / EU Dimensions Length 470 / 510 540 / 570 540 / 570 Width (transport) 205 / 220 210 / 215 235 / 255 Width (conveyor belt folded out) 405 / 420... -
Page 11: Sandspreader Construction
the worker is king SANDSPREADER CONSTRUCTION A Sandspreader has many different components and parts. This chapter will describe each of them. 6.1. The frame The frame carries the sand bunker and the extra conveyor belt. Under the frame there are two oscillating axles equipped with 2 wheels each. 6.2. -
Page 12: Sandspreader Operation
the worker is king SANDSPREADER OPERATION To ensure the proper spreading pattern for your desired result, it is important to understand how to operate each component and to learn what their individual effect is on the sand. The three most common spreading patterns are as follows: Oval spreading pattern The oval or rounded image provides good results and is most commonly used. -
Page 13: Connecting And Disconnecting The Sandspreader
the worker is king 7.1. Connecting and disconnecting the Sandspreader The following steps describe how to connect and disconnect the Sandspreader. The sandbox must never be filled while the machine is disconnected. Stay clear from the area between the tractor and trailed vehicle when connected. In case of an emergency, stop the tractor and machine, switch it off and leave the tractor. -
Page 14: Adjusting Spreading Width
the worker is king 7.2. Adjusting spreading width Via speed disk unit The rotational speed of the dishes determines the spreading width. The higher the rotational speed, the wider the spread. The following are instructions for adjusting the speed. Operation on machine: Proportional: Apply the parking brake of the tractor;... -
Page 15: Adjusting The Spreading Pattern
the worker is king 7.3. Adjusting the spreading pattern Via distancing dish unit Changing the distance determines where the sand leaves the dishes. When the dish is further away from the machine, the sand is spread more evenly. When the dish is closer to the machine, more sand is sprinkled at the edges. This gives a ‘V-shaped’ spreading pattern. -
Page 16: Adjusting The Layer Thickness
the worker is king 7.4. Adjusting the layer thickness In addition to the options below, there are many ways to change the spreading thickness. The spreading pattern settings also in- fluence layer thickness. For the correct optimization, maintain a consistent travel speed. Via speed conveyor belt There is a conveyor belt under the bunker that transports sand to the dish unit. - Page 17 the worker is king Via sand dosing valve adjustment On the back of the machine you will find the dosing valve. This valve, whether manually or hydraulically, limits the transport of sand to the dishes. Operation on machine: Proportional: Switch off the tractor including all hydraulics; Switch off the tractor including all hydraulics;...
-
Page 18: Other Optimization Possibilities
the worker is king 7.5. Other optimization possibilities Take the following into account: • It is best to use slightly damp or moist sand; • If the opening of the dosing valve is too large, there will be an interruption of the sand flow and sand will spread unevenly. Reduce the opening and increase the speed of the conveyor belt for the same yield. - Page 19 the worker is king Proporional operation of additional conveyor belt Conveyor belt operation switch-on Switch A to ´ON´ position. The green light lights up. Expanding the conveyor belt (Close discharging) Switch B to icon conveyor belt; Lever C ↑ to expand; Lever C ↓...
-
Page 20: Operation Of Sp100 On A Multifunctional Working Vehicle
Lock the attachment points with the locking pins; Drive the vehicle under the Sandspreader; Turn in the rear support legs to mount the pivot point of the SP100 to the frame. Attach the lifting cylinder(s) to the frame of the Sandspreader;... -
Page 21: Transport And Storage
the worker is king 7.10. Transport and storage Transport: When transporting the machine, a suitable means of transport must be selected. Make sure that the machine is secured against rolling away and tipping over. If you don’t have sufficient knowledge for a transport, carry it out by a specialised transport company. Provide at least four attachment points on the transporting vehicle. -
Page 22: Maintenance
the worker is king MAINTENANCE To maintain machine quality, adhere to the following diagram. The list of spare parts will show the correct parts to replace. Always ensure that the machine is switched off, cannot move and has cooled down completely. Make sure that maintenance is perfomed by qualified people. -
Page 23: Lubrication Schedule
the worker is king 8.1. Lubrication schedule To maintain machine quality, adhere to the following diagram. Always ensure that the machine is switched off, cannot move and has cooled down completely. Make sure that maintenance is perfomed by qualified people. Observe the safety precautions mentioned in this manual. Operating hours Lubricate pendulum bearings wheel set Lubricate bearing conveyor belt... -
Page 24: Failures
the worker is king FAILURES If a failure is detected, please go through the following points before contacting your dealer. General Symptom Cause Solution Check the specifications/ user manual of Insufficient oil supply from the tractor the tractor Check the manual of the tractor for the Components don´t work at the set speed Oil quality of the tractor right quality of the oil or how to replace... -
Page 25: 10. End Of Life
the worker is king 10. END OF LIFE To dispose of a machine, follow all local regulations. Practice appropriate safety measures. Follow these steps: 1. Decommission the machine and shut it down hydraulically; 2. Drain and recycle all consumables; 3. Dispose of the machine in accordance with the local regulations. ANNEX I TIGHTENING TORQUE When tightening bolts, observe the following maximum torques (ISO898/1). -
Page 26: Annex Ii Risk Analysis
the worker is king ANNEX II RISK ANALYSIS Based on risk analysis, the machine has been designed with the safety of users and bystanders in mind. Below is a list of the measures that have been taken to ensure proper safety and prevent injury: Item Risk When... -
Page 27: Annex Iii Safety Stickers
the worker is king ANNEX III SAFETY STICKERS To promote safe practices and proper handling reminders, safety stickers are adhered to all machines. If a sticker cannot be read or found, it should be replaced immediately. The following page shows an overview of all the stickers and their positions. GKB001 Comply with all main- GKB002 Refer to the owner’s tenance instructions... - Page 28 The illustrations below show all the safety stickers and their positions: Left view: Rear view: GKB008 MODEL GKB010 GKB009 GKBLOGO GKB011 GKB010 018417 GKB LOGO Right view: Front view: GKB008 GKB001 GKB002 GKB003 GKB LOGO GKB009 GKB008 MODEL GKB012 GKB LOGO GKB012 Sandspreader_2301...
Need help?
Do you have a question about the SP400 and is the answer not in the manual?
Questions and answers