Related Manuals for GKB SP300
Summarization of Contents
SAFETY
General Safety
General safety principles for operating the machine.
Safety Instructions
Detailed safety instructions for machine operation and maintenance.
Driving on Public Roads and Tires
Guidelines for operating the machine on public roads.
Product Specifications Sandspreaders
Technical specifications for standard Sandspreader models.
Product Specifications with Conveyor Belt
Technical specifications for Sandspreaders with conveyor belts.
SANDSPREADER CONSTRUCTION
Main Components
Description of the frame, conveyor belt, bunker, dish unit, and hydraulics.
Additional Conveyor Belt
Information on the optional additional conveyor belt.
SANDSPREADER OPERATION
Spreading Patterns
Explanation of oval, pyramidal, and "V" spreading patterns.
Connecting and Disconnecting
Step-by-step guide for connecting and disconnecting the sandspreader.
Adjusting Spreading Width
Instructions on how to adjust the spreading width.
Adjusting Spreading Pattern
Methods for adjusting the sand spreading pattern.
Adjusting Layer Thickness
Procedures for adjusting the layer thickness of spread material.
Sand Dosing Valve Adjustment
How to adjust the sand dosing valve for layer thickness.
Other Optimization Possibilities
Tips for optimizing the sand spreading process.
Adjusting Additional Conveyor Belt
Instructions for adjusting the optional additional conveyor belt.
Proportional Operation of Additional Conveyor Belt
Detailed operation of the additional conveyor belt via control panel.
Operation on Multifunctional Vehicle
Mounting and operating the SP100 on specific vehicles.
Transport and Storage
Guidelines for transporting and storing the sandspreader.
MAINTENANCE
Tire Pressure
Recommended tire pressures for different operating conditions.
General Maintenance Checks
General maintenance checks for hydraulics, electronics, and rotating parts.
FAILURES
General Failures
Troubleshooting for general machine failures.
Braking System Failures
Troubleshooting common issues with the braking system.
Electrical System Failures
Troubleshooting problems in the electrical system.
ANNEX II RISK ANALYSIS
Component Risks
Risks associated with conveyor belts, sand bunker, and disk units.
Operational & System Risks
Risks in the machine environment, optional belt, hydraulics, and electrical voltage.
ANNEX III SAFETY STICKERS
General Safety Stickers
Stickers for maintenance compliance, manual reference, and lubrication.
Rotating Parts Hazards
Stickers warning of retraction, finger cutting, and general danger from rotating parts.
Operational Safety Stickers
Stickers for PTO safety, swinging/flying parts distance, and hot surfaces.
Crushing & Retraction Warnings
Stickers warning about crushing, retraction when opening covers, and between tractor/implement.
Adjustment & Speed Stickers
Stickers for adjustment range and required speed.
Need help?
Do you have a question about the SP300 and is the answer not in the manual?
Questions and answers