Related Manuals for Stoll ProfiLine 48-42
Summarization of Contents
About STOLL ProfiLine Front Loader Operating Instructions
Documentation Overview
Overview of available documentation and how to obtain missing or different language versions.
Installation Instructions for Mounting Kit
Information for specialist workshops regarding installation of mounting kit and equipment.
Front Loader Operating Instructions
Describes safe use of the front loader from initial operation to disposal.
Spare Parts List
Lists information for ordering spare parts and front loader series options.
Other Applicable Documents
Lists other relevant documents and regulations to observe during operation and service.
Nomenclature of the Footer
Details the parameters and their meaning found in the document footer.
Use and Purpose of Operating Instructions
Use and Purpose of Operating Instructions
Outlines the purpose of the instructions for safe and proper operation of front loaders.
Rating Plate Identification
Explains the identification plate on the front loader and its components.
Safety Information and Warnings
Explanation of Safety and Warning Notices
Explains basic safety information and action-related warning notices.
Representation and Layout of Warning Notices
Describes the principle for designing and laying out warning notices with danger types.
Danger Grading of Warning Notices
Explains how warning notices are graded by danger level with signal words and symbols.
EC Conformity
States that STOLL front loaders comply with Machine Directive 2006/42/EC.
Proper Use of Front Loader
Defines the intended use of the front loader and what constitutes improper use.
Operational Limits
Outlines the operating conditions and environmental requirements that must be observed.
Basic Safety Information
Presents fundamental safety measures applicable at all times, grouped by theme.
Danger Zones
Identifies areas around the front loader with increased safety risks for operators and others.
Safety Equipment
Lists protective and safety equipment like safety stickers, anti-lowering guard, and OPG.
Safety Stickers
Explains the importance of safety stickers and their locations on the front loader.
Personnel Requirements
Defines roles (operators, qualified personnel, tradesmen) and their responsibilities for safe operation.
Behaviour in Case of Emergency
Provides instructions on how to act in emergencies like tractor tipping or flashovers.
Front Loader Structure and Components
Structure of FS Front Loaders
Identifies and illustrates the main components of FS front loaders.
Structure of FZ Front Loaders
Identifies and illustrates the main components of FZ front loaders, noting parallel motion.
Equipment Variations
Shows a table comparing different equipment versions (FS, FZ, FZ-L) and their options.
Mounting Kit on the Tractor
Describes the components of the mounting kit for attaching the front loader to the tractor.
Change Frames
Explains the purpose and types of change frames used for mounting implements.
Wear Runners
Explains the function and availability of wear runners for protecting the change frame and implement.
Hydraulic Lines
Illustrates and describes the hydraulic lines connecting the tractor and front loader.
Hydraulic Couplings
Introduces the hydraulic couplings for connecting the loader and tractor.
Front Loader Functions
Implement Locking Mechanism
Explains the function of the implement locking mechanism.
Hydraulic Implement Locking Mechanism – Hydro-Lock
Describes the optional hydraulic implement locking mechanism.
Basic Functions
Explains the four basic functions: Lifting, Lowering, Scooping, and Dumping.
Float Position
Explains the float position and its associated risks and usage.
Indicator for Implement Position
Describes the implement position indicator and how to set it.
Parallel Motion (FZ, FZ-L)
Explains the parallel motion function for FZ and FZ-L loaders and its suitability.
Quick Emptying (FZ-L)
Describes the quick emptying function for FZ-L loaders and its usage.
Return To Level (FZ-L)
Explains the Return To Level (RTL) function for FZ-L loaders and its risks.
Anti-Lowering Guard
Describes the anti-lowering guard's function and its limitations.
Operator Protective Guard (OPG)
Explains the Operator Protective Guard (OPG) and its purpose.
Additional Functions
Introduces additional functions available for the front loader.
Comfort Drive
Describes the Comfort Drive function for smoother driving and its operation.
Start-up Procedures
Initial Operation
Outlines the initial operation steps, including checks and re-tightening after first use.
Check Before Each Start-up
Provides a checklist for pre-start-up checks to ensure safe operation.
Preparations
Details preparations needed before operating the front loader.
Mounting the Front Loader
Provides detailed instructions and warnings for mounting the front loader onto the tractor.
Aligning the Front Loader for Mounting
Explains how to align the front loader pillars for mounting if they are too high or low.
Adjusting the Front Loader Locking Mechanism
Provides instructions and warnings for adjusting the front loader locking mechanism.
Front Loader Operation
Operating Elements
Introduces the operating elements used to control the front loader.
Locking and Unlocking Operating Lever
Explains how to lock and unlock the operating lever in the zero position.
STOLL Base Control
Describes the STOLL Base Control operating lever and its functions.
STOLL Pro Control
Details the STOLL Pro Control operating lever, its capabilities, and limitations.
Switching Controls On and Off
Instructions for switching the front loader controls on and off.
Implement Locking Mechanism Operation
Explains how to use switch S3 to lock and unlock the implement.
Working at Half-Speed
Describes how to activate half-speed for careful load handling.
Depressurizing Hydraulic System Electronically
Explains electronic depressurization of the 3rd and 4th control circuits.
STOLL Trac Control
Describes the STOLL Trac Control operating lever and its button assignments.
Switch/Changeover Switch Functions
Explains switches for quick emptying/3rd control circuit and RTL/4th control circuit, and headlights.
REAL3 Valve Operation
Details the REAL3 valve and its depressurization procedure.
Comfort Hydraulic System
Explains the Comfort hydraulic system and its switch for active/inactive modes.
Operating the Parking Supports
Provides instructions for unfolding and folding the parking supports.
Operating the Hydraulic Couplings
Explains how to connect and disconnect hydraulic couplings.
Operating the Implement Locking Mechanism
Explains the operation of the implement locking mechanism.
Picking Up and Putting Down the Implement
Provides instructions for safely picking up and putting down implements.
Levelling in Reverse
Explains how to perform levelling work in reverse with a bucket implement.
Clearing Work (Snow Removal)
Provides instructions and warnings for clearing work, especially snow removal.
Picking Up Loads
Explains how to pick up loads safely, including warnings about falling loads and driving on roads.
Driving on Roads
Provides critical safety information and procedures for driving on roads.
Passing Through Low Clearances
Provides procedures for passing through low clearances safely.
Parking the Tractor with Front Loader
Gives instructions and warnings for safely parking the tractor with the front loader.
Servicing and Maintenance
Cleaning and Care
Explains cleaning procedures and the importance of using appropriate cleaning agents.
Lubrication Points
Identifies lubrication points on the front loader mountings and FS/FZ loaders.
Lubrication Schedule
Provides a schedule for lubrication intervals and recommended lubricants.
Service Schedule
Presents a detailed schedule of maintenance tasks and their intervals.
Service Instructions for Front Loader Mountings
Provides instructions for checking the wear on front loader catch hooks.
Service Instructions for Front Loader Locking Mechanism
Details how to check the front loader locking mechanism on specific FS/FZ models.
Service Instructions for Comfort Drive
States that Comfort Drive maintenance must be done by an authorized workshop.
Service Instructions for Hydraulic Lines
Warns about defective hydraulic lines and provides service life guidelines.
Service Instructions for Crack Formation
Warns about serious injury from components breaking off due to cracks.
Service Instructions for the Change Frame
Warns about serious injury from change frame breaking off and how to check wear.
Service Instructions for Oil Changes
Explains how to perform oil changes and procedures after the change.
Repairs
Emphasizes that repairs must be done by authorized workshops and lists requirements.
Decommissioning Procedures
Temporary Decommissioning
Provides instructions for temporarily removing the front loader from the tractor safely.
Recommissioning the Front Loader
Outlines the steps for recommissioning the front loader after temporary decommissioning.
Final Decommissioning and Disposal
Provides guidance on proper final decommissioning and disposal of the front loader.
Spare Parts and Customer Service
Spare Parts Information
Warns about using non-approved spare parts and lists safety stickers with order information.
Customer Service Contact
Directs users to contact their dealer for further questions.
Technical Specifications
Dimensions and Weights
Provides a table with dimensions and weights for various front loader models.
Noise Emissions
States the emission sound pressure level.
Tightening Torques for Screws
Lists tightening torques for various screw threads and strength categories.
Hydraulic Diagrams
Introduces hydraulic diagrams for the front loader.
Anti-Lowering Guard Hydraulic Plan
Shows excerpts from the hydraulic diagram for the anti-lowering guard.
Lowering Throttle Hydraulic Diagram
Shows excerpts from the hydraulic diagram for the lowering throttle.
Electric Circuit Diagram
Introduces the electric circuit diagram and warnings about voltage and fuses.
Hydraulic Valve Arrangement
Illustrates the arrangement of hydraulic valves for additional functions on the lifting arm.
EC/EU Declaration of Conformity
Front Loader Declaration of Conformity
Declares conformity of the ProfiLine front loader with EU directives on machinery and EMC.
Operator Protective Guard (OPG) Declaration
Declares conformity of the OPG with EU directives and its function.
Need help?
Do you have a question about the ProfiLine 48-42 and is the answer not in the manual?
Questions and answers