Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Sipma RN 610 ANTEK
Summarization of Contents
Introduction
Intended Purpose
Defines the machine's agricultural use and limitations for spreading mineral, granular fertilizers.
Safety of Use and Warnings
Rules for Safe Work
Outlines essential safety practices for operation, maintenance, and general work procedures.
Fire Regulations
Specifies safety measures related to fire hazards during machine operation and maintenance.
Description of Residual Risk
Residual Risk Assessment
Identifies potential hazards during machine operation and daily use, with mitigation strategies.
Warning and Information Stickers
Machine Identification
Details how to identify the machine via its nameplate and factory number.
Construction and Principle of Operation
Describes the machine's main components and their functional principles.
Equipment of the Machine
Lists the standard equipment included with the fertilizer spreader models.
Accessory Equipment
Details optional equipment that can be installed on the machine.
Technical and Operational Characteristics
Declared Noise Emission Values
Reports the measured noise emission levels at the operator's workstation.
Operational Maintenance
Safety Rules for Maintenance Operations
Specifies safety precautions before performing maintenance tasks on the machine.
Delivery, Unloading, First Commissioning
Guides the user through initial setup, unloading, and first commissioning procedures.
Installation of Articulated Shaft
Details the procedure for safely connecting the articulated telescopic PTO shaft.
Preparing the Machine to Work
Details pre-operation checks and assessment of tractor suitability for the spreader.
Aggregation of the Machine with the Tractor
Explains how to safely connect and aggregate the machine with the tractor.
Connection of Electrical Installations
Describes connecting the machine's lighting and electronic control systems.
Driving and Transport
Move Machine to Transport Position
Guides on preparing the machine for safe transport and road travel.
Crossings, Driving on Public Roads
Outlines safety precautions and regulations for driving the machine on public roads.
Work Operations
Loading the Cargo Box
Details procedures for safely filling the fertilizer spreader tank.
Adjusting Seeding Working Height
Explains how to set the correct attachment height for effective spreading.
Adjusting Spreading Working Width
Describes how to set the working width based on fertilizer type and desired coverage.
Spreading on Borders and Edges
Covers specific techniques and settings for border and edge fertilizer application.
Seeding Rate Adjustment
Explains how to adjust the fertilizer application rate using hydraulic controls.
Calibration Test
Details procedures for calibrating the seeding rate for accurate application.
Spreader Work
Covers the actual operation of spreading fertilizer in the field.
Machine Maintenance
Replacement of Working Elements
Guides on replacing worn or damaged components of the seeding system.
Electrical Installation Maintenance
Covers checks and maintenance of the machine's electrical system and wiring.
Cleaning
Provides instructions for cleaning the machine after operation.
Lubrication
Details lubrication points, types of grease, and lubrication frequency.
Daily Service
Outlines routine checks and tasks before and after each work session.
Post-Season Service
Describes maintenance procedures required at the end of the agrotechnical season.
Storage of the Machine
Instructions for proper storage of the machine to maintain its condition.
Transport
General guidelines and precautions for transporting the machine.
Causes of Malfunctions and Ways to Fix Them
A troubleshooting guide for common malfunctions and their solutions.
Spare Parts
Information on how and where to order replacement parts for the machine.
Warranty
Information on the terms and conditions of the machine's warranty.
Tightening Torques
Specifies torque values for threaded connections according to strength class.
Product Validation
Overall Evaluation of the Machine
User feedback section for assessing machine performance and satisfaction.
Need help?
Do you have a question about the RN 610 ANTEK and is the answer not in the manual?
Questions and answers