Functional Description; Carton Contents - Delta 31-735 Instruction Manual

FOREWORD
The Delta Model 31-735 is an abrasive finishing machine. This unit includes two tilting tables, a 4-1/2" arbor pulley, a V-
belt, a 100-grit aluminum oxide belt, and an 80-grit aluminum oxide disc.
NOTICE: The manual cover illustrates the current production model. All other illustrations contained in the manual are
representative only and may not depict the actual labeling or accessories included. These are intended to illustrate
technique only.
1
12
17
14
16
19
21
22
1. Cabinet
2. Dust Baffle
3. Bag Hanger
4. Dust Chute
5. Dust Bag
6. Hose (2)
7. Hose Clamp (5)
8. Belt / Disc Sander
9. Belt Sanding Table
10. Abrasive Disc
11. Disc Sanding Table
12. Caster
13. Foot Lever
14. Bracket
15. Pivot Bracket
16. 1/2x4" Pin
UNPACKING AND CLEANING
Carefully unpack the machine and all loose items from the shipping container(s). Remove the rust-preventative oil from
unpainted surfaces using a soft cloth moistened with mineral spirits, paint thinner or denatured alcohol.
Do not use highly volatile solvents such as gasoline, naphtha, acetone or lacquer thinner for cleaning your
machine.
After cleaning, cover the unpainted surfaces with a good quality household floor paste wax.

FUNCTIONAL DESCRIPTION

CARTON CONTENTS

2
4
3
13
15
32
18
20
23
17. 1/2" Flat Washer (2)
18. Retaining Ring (2)
19. 5/16-18x4" Hex Head Screw
20. 5/16-18 Lock Nut
21. 3/8-16x1" Carriage Head Bolt (3)
22. 3/8" Flat Washer (3)
23. 3/8-16 Hex Nut (3)
24. 1/4-20x5/8" Flat Head Screw (4)
25. 1/4" Flat Washer (4)
26. 1/4-20 Hex Nut (4)
27. 5/16-18x1/2" Hex Head Screw (4)
28. 5/16" Lockwasher (4)
29. #10-32x3/4" Button Head Screw (4)
30. #10 Flat Washer (4)
31. M4-0.7x12mm Sheet Metal Screw (4)
32. 3/8-16 Lock Nut
5
7
6
24
24
27
29
31
33
34
38
39
43
7
8
9
11
10
25
45
46
28
30
36 37
35
41
40
42
44
33. 1-3/16" Spring
34. Ratchet Lever
35. 3/8-16x3½" Stud
36. 3/8-16 Hex Nut
37. 3/8 Flat Washer
38. Disc Table Lock Handle (2)
39. 1/2" Spring (2)
40. 7/16-18x3" Stud (2)
41. 7/16" Flat Washer (2)
42. Disc Table Clamp (2)
43. 1/4-20x1/4" Round Head Screw
44. Pointer
45. Circle Sanding Stop Block
46. Circle Sanding Guide Pin