Related Manuals for ASRock Industrial 4X4 BOX-AI350
Summarization of Contents
Copyright and Disclaimer
Copyright Notice
Legal notice on documentation reproduction and transcription.
Disclaimer
Statement on specifications, information, and liability for errors or omissions.
Battery Safety Information
Button Battery Warning
Hazard of swallowing button batteries and safety precautions for children.
Replaceable Batteries Caution
Risk of explosion if battery is replaced incorrectly; proper disposal instructions.
Regulatory and Environmental Information
California Perchlorate Notice
Regulations regarding lithium battery perchlorate content in California.
Australian Consumer Law
Information on guarantees and compensation under Australian Consumer Law.
CE Compliance and Disposal
CE compliance, green design concept, and proper disposal of electronic waste.
Hot Surface Warning
Cautionary note about hot surfaces on the product, advising not to touch.
Installation and Contact Details
VESA Mount Screw Specification
Specifies M4x6mm screws for securing the VESA bracket to the monitor.
Power Connection Safety
Instructions for connecting to a grounded outlet via an external power cord.
ASRock Industrial Contact
Provides website and email for further information and dealer contact.
Chapter 1 Introduction
1.1 Package Contents
Lists items included with the 4X4 BOX A1300 Series.
Product Specifications - Part 1
1.2 Product Specifications - Part 1
Details CPU, BIOS, Memory, Storage, LAN, WiFi, Audio, and I/O specifications.
Product Specifications - Physical Details
1.2 Product Specifications - Physical Details
Covers Power Unit, Dimensions, VESA, Weight, and Operating Temperature.
Block Diagram
1.3 Block Diagram
Visual representation of the 4X4-A1350 system architecture and component connections.
Chapter 2 Product Overview
2.1 Front View
Diagram and description of the front panel components and ports.
Rear View
2.2 Rear View
Diagram and description of the rear panel ports and LEDs.
Inside View
2.3 Inside View
Diagram showing internal component locations like WiFi, M.2, and SO-DIMM slots.
Chapter 3 Hardware Installation
3.1 How to Remove the Bottom Cover
Step-by-step guide to removing the bottom cover of the system.
Install WiFi Module
3.2 How to Install the WiFi Module (Type 2230)
Instructions for installing a Type 2230 WiFi module into the motherboard slot.
Install M.2 SSD (Type 2280)
3.3 How to install the M.2 SSD (Type 2280)
Steps for installing a Type 2280 M.2 SSD into the motherboard.
Install M.2 SSD (Type 2242) - M2_M2 Socket
3.4 How to install the M.2 SSD (Type 2242) into the M2_M2 Socket
Guide for installing a Type 2242 M.2 SSD into the M2_M2 socket.
Install M.2 SSD (Type 2242) - M2_M1 Socket
3.5 How to install the M.2 SSD (Type 2242) into the M2_M1 Socket
Steps for installing a Type 2242 M.2 SSD into the M2_M1 socket.
Install Memory Modules
3.6 How to Install the Memory Modules (DDR5)
Instructions for installing DDR5 SO-DIMM memory modules.
Install VESA Bracket
3.7 How to Install the VESA Bracket
Guide for attaching the VESA bracket to the system and a compatible display.
Remove Membranes
3.8 How to Remove the Membranes
Instructions to remove membranes from heatsinks before reassembling the bottom cover.
Positioning the System
3.9 Position
Options for placing the system vertically, horizontally, or VESA-mounted.
Chapter 4 Motherboard
4.1 Motherboard Layout
Diagram illustrating the layout of motherboard components and headers.
Motherboard Backside Components
Motherboard Backside Identification
Identification of backside components like Power Button, Fan Connector, and Battery Connector.
Onboard Headers and Connectors
JP1 Header and USB 2.0 Connector
Details on JP1 Header and USB 2.0 Connector pin assignments and functions.
System Panel Header
Information on the System Panel Header for chassis connections.
Front Panel Connections
HDLED and Front Panel Design
How to connect the Hard Drive Activity LED and front panel components.
DC-in Wafer and Backside Connectors
Details on DC-in Wafer, Power Button, FAN Connector, and Battery Connector.
ESPI Connector Pinout
ESPI Connector Details
Detailed pinout and function description for the 20-pin ESPI connector.
Expansion Slots (M.2)
M.2 Key-M Sockets
Pin definitions for M.2 Key-M sockets (M2_M1, M2_M2).
M.2 Key-E Socket
Pin definitions for the M.2 Key-E socket (M2_E1).
Chapter 5 UEFI Setup Utility
5.1 Introduction to UEFI
Overview of the ASRock Industrial UEFI BIOS utility and its functions.
UEFI Menu Bar
5.1.2 UEFI Menu Bar Options
Describes the selections available in the UEFI setup utility's menu bar.
Navigation Keys in UEFI
5.1.3 Navigation Keys
Explains the function of various keyboard keys used for navigating the UEFI interface.
UEFI Main Screen
5.2 Main Screen Overview
Displays the system overview upon entering the UEFI SETUP UTILITY.
UEFI Advanced Screen
5.3 Advanced Screen Options
Lists configurable items in the Advanced screen, including CPU, Chipset, IO, ACPI, USB, Power, Trusted Computing.
CPU Configuration
5.3.1 CPU Configuration Settings
Details PSS Support, Core Performance Boost, C-state Control, SVM Mode, and CPU Operation Mode.
Chipset Configuration
5.3.2 Chipset Configuration Settings
Covers IOMMU, Share Memory, Re-Size BAR, and SR-IOV.
Chipset Configuration Details
Onboard HD Audio
Option to enable or disable onboard HD audio.
Onboard LAN Settings
Options to enable or disable Onboard LAN1 and LAN2 features.
ASPM and Power Settings
Settings for ASPM Support, Restore on AC/Power Loss, and Deep S5.
Super IO Configuration
5.3.3 Super IO Configuration
Configuration for Watch Dog Timer Timeout Reset.
ACPI Configuration
5.3.4 ACPI Configuration Settings
Settings for Onboard LAN Power On and RTC Alarm Power On.
USB Configuration
5.3.5 USB Configuration
Option for controlling USB Power Control settings.
Power Configuration
5.3.6 Power Configuration
Setting for the OCP Function (Over Current Protect).
Trusted Computing Configuration
5.3.7 Trusted Computing Settings
Settings related to Security Device Support, PCR Banks, and TPM.
Trusted Computing Details
Pending Operation and Hierarchy
Settings for Pending Operation, Platform, Storage, Endorsement Hierarchy.
TPM Version and Device Select
Configuration for TPM 2.0 Interface Type, Device Select, and Onboard TPM.
Hardware Health Event Monitoring
5.4 Hardware Health Monitoring
Monitoring CPU/M/B temperature, FAN speed, and voltages.
Fan 1 Setting
Options for selecting fan modes for Fan 1.
Security Screen
5.5 Security Screen Settings
Options for setting Supervisor Password, User Password, and Secure Boot.
Boot Screen
5.6 Boot Screen Options
Configuration for boot order, boot from LAN, Num Lock, and Full Screen Logo.
Exit Screen
5.7 Exit Screen Options
Options to Save/Discard changes, Load Defaults, and Launch EFI Shell.
Chapter 6 Software Support
6.1 Install Operating System
General guidance for installing Microsoft Windows 11 (64-bit) operating system.
Need help?
Do you have a question about the 4X4 BOX-AI350 and is the answer not in the manual?
Questions and answers