Table of Contents
Advertisement
G e t s t a r t e d
1. Connect the charger to a wall outlet.
2. Connect the charger cable to the charger connector. The indicator light is
red while charging. It may take a while before charging starts. If charging
does not start, disconnect the charger, plug it in again, and retry.
Charging the battery fully may take up to 1 hour and 30 minutes.
3. When the battery is fully charged, the indicator light turns green.
Disconnect the charger from the headset and the wall outlet.
The fully charged battery has power for up to 15 hours of talk time, up to 300
hours of standby time, or up to 15 hours of music playing time. However, the
times may vary with different compatible Bluetooth devices, usage settings,
usage styles, and environments.
When battery power is low, the headset beeps at regular intervals, and the
indicator light slowly flashes red. Recharge the battery.
■ Switch the headset on or off
Switch on
To switch on, press and hold the multifunction key for about 2 seconds. The
headset beeps, and the green indicator light is briefly displayed.
When the headset tries to connect to the paired mobile phone or music player
that you have last used with it, the indicator light slowly flashes green. When
the headset is connected to a paired device and is ready for use, the indicator
light slowly flashes blue. If the headset has not been paired with a device, it
automatically enters the pairing mode (see
p. 7).
If you connect the headset to a device but do not use it for a while, switch off
the headset to save power.
Switch off
To switch off, press and hold the multifunction key for about 5 seconds. The
headset beeps, and the red indicator light is briefly displayed.
6
"Pair and connect the headset,"
Hide quick links:
Advertisement
Table of Contents
