Table of Contents
Advertisement
Quick Links
EAE KNX Room Control Unit
Product Manual RCXXYY
Note:
RC2018
RC2000
RC1616
RC1600
RC1212
RC1200
RC0808
RC0800
RCXXYY where XX denotes the number of outputs and YY number of inputs.
Input and Output numbers are as in the table.
20 Output, 18 Input
20 Output, No Input
16 Output, 16 Input
16 Output, No Input
12 Output, 12 Input
12 Output, No Input
8 Output, 8 Input
8 Output, No Input
Advertisement
Table of Contents
Related Manuals for EAE RC2000
Summarization of Contents
1 General
1.1 Device Description
Room Control Unit RC Series are designed as an all-in-one product for various room layouts.
1.2 Technical Data
Provides detailed specifications for the RCXXYY Series, including protection, supply, connections, output, input, etc.
1.3 Connection Example
Connection Example 1
Wiring diagram for RC2018 with fan coil and valve loads.
Connection Example 2
Wiring diagram for RC2018 with lighting and blind loads.
Connection Example 3
Wiring diagram for RC0808 with fan coil and valve loads.
Connection Example 4
Wiring diagram for RC0808 with lighting and blind loads.
1.3 Scale Drawings RCXXYY
RC2018
Scale drawing showing dimensions and front panel layout for the RC2018 model.
RC1616
Scale drawing showing dimensions and front panel layout for the RC1616 model.
RC1212
Scale drawing showing dimensions and front panel layout for the RC1212 model.
RC0808
Scale drawing showing dimensions and front panel layout for the RC0808 model.
Scale Dimensions RCXXYY
Overall Unit Dimensions
Provides side profile dimensions (width, height, depth) for the RCXXYY unit.
2 Communication Object Table
Communication Objects Overview
Lists all communication objects, their names, functions, DTP types, lengths, and flags.
3 Parameters
3.1 General
General configuration parameters for manual operation, device alive status, and telegram settings.
3.2 Weather alarms
Configuration for wind, rain, and frost alarms, including priority and monitoring periods.
4.1 Scene
Configuration of scene functions, allowing storage and recall of device states for multiple devices.
4.2 Enable Input a...s
Configuration options for input channels, allowing assignment of functions like switch, dim, shutter, or value operation.
4.2.1 a - Switch Sensor
Switch Sensor Configuration
Configures inputs as switches/push buttons, detailing debounce and reaction settings.
4.2.2 a - Switch Dim Sensor
Switch Dim Sensor Configuration
Configures inputs for dimming control, supporting ON/OFF and dimming with various modes.
4.2.3 a - Blind Sensor
Blind Sensor Configuration
Configures inputs for blind/shutter/awning control, including operation modes and timing.
4.2.4 a - Value/Forced Operation
Value/Forced Operation Configuration
Configures inputs to send value/forced operation telegrams, supporting data types and press actions.
4.3 Enable Output A...J
Output Group Configuration
Enables and configures output groups for shutter/blind, fan coil, or valve control.
4.4 Switch
4.4.1 A1 - General
General settings for switch outputs, including contact type, feedback, and bus voltage behavior.
4.4.2 A1 - Function
Enables and configures specific functions for output A1: staircase, external logic, priority, sweep.
4.4.2.1 A1 - Staircase Function
Detailed configuration for staircase lighting: duration, retriggering, and pre-warning.
4.4.2.2 A1 - External logic
External Logic Configuration
Links switch outputs with external logic inputs using AND, OR, XOR operations.
4.4.2.3 A1 - Sweep
Sweep Function Configuration
Configures sweep function for pre-warning before lights turn off: blink count and timing.
4.4.2.4 A1 - Scene
Scene Configuration for Output A1
Configures scene parameters for output A1, linking scenes to specific values or states.
4.5 Blind
4.5.1 A/B - General
General settings for blind control: mode of operation and behavior after ETS programming/reset.
4.5.2 A/B – Drive Blind
Configures blind drive parameters: travel times, disconnect options, and limit range.
4.5.3 A/B – Drive Slat
Configures slat adjustment in blinds: timing, number of steps, and limit commands.
4.5.4 A/B – Functions
Enables blind functions: position/presets, weather alarms, forced position, and feedbacks.
4.5.4.1 A/B - Position/Presets
Configures preset positions for blind height and slat, allowing direct recall via communication objects.
4.5.4.2 A/B - Weather alarm
Configures weather-dependent blind control: assignment, priority, and behavior during alarms.
4.5.4.3 A/B - Forced position
Configures forced operation of blinds: manual override or specific positions via telegrams.
4.5.4.4 A/B – Feedbacks
Configures blind status feedback: height, slat position, and end position status reporting.
4.5.4.5 A/B – Scene
Configures scene parameters for blind control: linking scenes to specific blind positions or slat angles.
4.6 Valve Control
4.6.1 A/B – Control Input
Configures valve control inputs: HVAC system type and behavior after bus voltage recovery.
4.6.2 A – Valve General
General settings for valve control: valve type, contact type, reversing time, and bus voltage behavior.
4.6.3 A – Function
Configures valve functions: blocking, forced operation, and valve purge settings.
4.6.4 A – Limit
Configures limits for control value and valve position to restrict operation range.
4.7 Fan Coil
4.7.1 Fan
Configures fan control: fan levels, operation modes, and speed settings.
4.7.2 A/B1 - Status Message
Configures status messages for fan speed, ON/OFF, and automatic operation.
4.7.3 A/B1 - Automatic Operation
Configures automatic fan operation: threshold values, hysteresis, and dwell periods.
4.7.4 A/B1 - Direct Mode
Configures direct fan control via communication objects for speed, UP/DOWN, and status.
5 Function Chart
Function Sequence Overview
Schematic showing function sequence and communication object flow.
6 Object Description
6.1 General Object Description
Describes general communication objects: In operation, Scene 8-bit, and manual operation disable.
6.2 Input Object Description
Describes objects for inputs: Disable, Switch, Shutter up/down, and Value.
6.3 Switch Object Description
Describes objects for switch outputs: Switch, Status switch, Enable staircase function, etc.
6.4 Blind Object Description
Describes objects for blind control: Move blind/shutter, Slat adjustment, and position commands.
6.5 Valve Object Description
Describes objects for valve control: Control valve, Toggle Heating/Cooling, and Forced operation.
6.6 Fan Object Description
Describes objects for fan control: Fan speed, Switch speed, and Status fan ON/OFF.
Need help?
Do you have a question about the RC2000 and is the answer not in the manual?
Questions and answers