Table of Contents
Advertisement
Quick Links
Thermostatic incubator
Operation Manual
• Please read this manual carefully before use
• The company reserves the right to interpret the instruction manual
• Please keep it together with the invoice after reading
• In case of any update of product technology or software, no prior notice will be provided.
• Please refer to the appearance of actual product
Model
HFP-80
HFP-168
HFP-258
HZP-80
HZP-168
HZP-258
Advertisement
Table of Contents
Related Manuals for Haier HZP-168
Summarization of Contents
Safety precautions
Safety label
Visual indicators and symbols used to denote potential hazards and safety instructions.
Safety warning
Critical warnings and precautions for safe operation and to prevent injury or damage.
Product introduction
Intended use
Primary application and purpose of the thermostatic incubator in laboratory experiments.
Product classification
Categorization of the product series as direct-heated incubators.
Parameter control
Range of temperature control, display accuracy, and computer interface capabilities.
Product structure
Description of the incubator's platform frame, control circuit, touch screen, and dual-door design.
Safety system
Overview of fault alarms, alarm modes, and grounding for safety.
Humanized design
Features such as friendly touch interface, data storage, and convenient drainage.
Product installation
Product unpacking and handling
Instructions for safely unpacking and moving the incubator, emphasizing two-adult handling.
Installation Environment
Recommended ambient temperature, humidity, pressure, and avoidance of corrosive gases.
Spacing
Requirements for maintaining safe distances around the device for ventilation and access.
Connection of main power supply
Procedures for connecting the power supply, ensuring correct voltage and grounding.
Name of each part • Control panel
Name of each part
Identification of external interfaces, controls, and structural components of the incubator.
Debugging and use
Preparation before use
Pre-operational checks including ambient temperature and door status.
Initial configuration and interfaces
Steps for initial setup including language, network, time, password, and interface navigation.
Home page overview
Overview of the main interface functions like running records, data, settings, and program start.
Set
Parameter settings interface
Interface for adjusting temperature, fan speed, and alarm limits.
Device running modes
Selection and configuration of fixed, appointed, and program running modes.
Program settings
Interface for creating and managing custom temperature programs.
Basic settings
Configuration options for language, time, alarm volume, and screen settings.
Alarm
Alarm type
Classification of alarms including high/low temperature, door opening, and sensor faults.
Alarm restoration
Information on automatic alarm recovery and manual muting procedures.
Cleaning and sterilization
Cleaning
Guidelines for cleaning external surfaces and the display screen, avoiding harsh solvents.
Disinfection and sterilization
Procedures for pollution control and disinfection of interior surfaces and components.
Specifications
Specification
Detailed technical specifications including volume, materials, dimensions, and electrical parameters.
Need help?
Do you have a question about the HZP-168 and is the answer not in the manual?
Questions and answers