Advertisement

INSTALLATION
MANUAL
Jolywood N-type Mono-crystalline Double Glass Module
All rights reserved © Jolywood (Taizhou) Solar Technology Co., Ltd

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HD120N-R3 and is the answer not in the manual?

Questions and answers

Summarization of Contents

1.0 Introduction
1.1 Declaration
Jolywood reserves the right to change the manual without prior notice.
1.2 Limitation of Liability
Jolywood is not responsible for injuries or losses due to installation errors or failure to follow instructions.
2.0 Safety Precautions
2.1 Warning
Read and understand all safety rules before installation, wiring, operation, or maintenance.
2.2 General Safety
General safety guidelines for handling and installing modules, avoiding damage and electric shock.
2.3 operation instruction
Instructions for safe operation, avoiding damage, and handling electrical components.
3.0 Unload, Transportation and Storage
3.1 Marks on Outer Packaging
Identifies markings on outer packaging indicating compliance and handling instructions.
3.1.1 Prohibit discarding modules randomly, special recycling is needed
Prohibits random discarding of modules and emphasizes special recycling needs.
3.1.2 Protect modules from rain or moisture
Instructions on protecting modules from environmental factors like rain and moisture.
3.1.3 Modules in carton are fragile, shall be handled with care
Highlights that modules in cartons are fragile and require careful handling.
3.1.4 The package should be vertically up during transportation
Specifies that packages should be kept vertically oriented during transportation.
3.1.5 Do not step on or stand above package or module
Warns against stepping on or standing on packages or modules.
3.1.6 Stack no more than 2 layers
Guidance on stacking limits, stating no more than 2 layers are permitted.
3.2 Unloading Instructions
Provides detailed steps and safety precautions for unloading modules from vehicles.
3.3 Secondary Transportation and Precautions
Details procedures and safety measures for transporting modules after initial delivery.
3.4 Storage
Guidelines for storing modules in a dry, ventilated environment, including temperature and humidity requirements.
4.0 Unpacking instruction
4.1 Unpacking safety instruction
Safety guidelines to follow when unpacking modules, including environmental and handling precautions.
4.2 Unpacking steps
Step-by-step instructions for safely unpacking modules from their packaging.
5.0 Installation
5.1 Installation Safety
Critical safety measures to be observed during the installation process of PV modules.
5.2 Installation method
Details the various methods for mechanically installing PV modules.
5.2.1 Mechanical installation and precautions
General mechanical installation procedures and safety considerations for mounting modules.
5.2.2 Framed Bifacial Double-Glass Modules (installation with clamps)
Specific instructions for installing framed bifacial double-glass modules using clamps.
5.2.3 Framed Bifacial Double-Glass Modules (installation with bolt)
Specific instructions for installing framed bifacial double-glass modules using bolts.
5.2.4 Installation of full frame double glass modules (Installation with flat single axis tracker)
Procedure for installing full frame double glass modules using a flat single axis tracker.
5.2.5 Grounding
Essential procedures for properly grounding PV modules and mounting systems.
5.2.6 Electrical Installation
Guidelines for performing electrical wiring and connections for the PV system.
5.2.7 Wiring
Instructions for connecting modules in series or parallel, ensuring correct polarity.
6.0 Maintenance for PV Modules
6.1 Module Visual Inspection and Replacement
Procedures for visually inspecting modules for damage and guidance on replacement.
6.2 Connector and Cable Inspection
Checks for secure and clean connectors and cables, ensuring system integrity.
6.3 Cleaning
Instructions and precautions for cleaning PV modules to maintain optimal performance.
6.3.1 Water quality requirements
Specifies the required water quality parameters for cleaning PV modules.
6.3.2 Module inspection after cleaning
Steps for inspecting modules after the cleaning process to ensure proper condition.
6.3.3 Troubleshooting
Guidance on addressing issues if modules do not function after installation.

Table of Contents