Linksys WRVS4400N User Manual page 128

3. In the Components checked are used by this connection box, highlight Internet Protocol
(TCP/IP), and click the Properties button. Select Use the following IP address option.
4. Enter a unique IP address that is not used by any other computer on the network connected
to the Router. You can only use an IP address in the ranges 192.168.1.2 to 192.168.1.99 and
192.168.1.151 to 192.168.1.254.
5. Enter the Subnet Mask, 255.255.255.0.
6. Enter the Default Gateway, 192.168.1.1 (Router's default IP address).
7. Toward the bottom of the window, select Use the following DNS server addresses, and
enter the Preferred DNS server and Alternative DNS server (provided by your ISP). Contact
your ISP or go on its website to find the information.
8. Click the OK button in the Internet Protocol (TCP/IP) Properties window, and click the OK
button in the Local Area Connection Properties window.
9. Restart the computer if asked.
For Windows XP:
The following instructions assume you are running Windows XP with the default interface. If
you are using the Classic interface (where the icons and menus look like previous Windows
versions), please follow the instructions for Windows 2000.
1. Click Start and Control Panel.
2. Click the Network and Internet Connections icon and then the Network Connections
icon.
3. Right-click the Local Area Connection that is associated with the Ethernet adapter you are
using, and select the Properties option.
4. In the This connection uses the following items box, highlight Internet Protocol (TCP/IP).
Click the Properties button.
5. Enter a unique IP address that is not used by any other computer on the network connected
to the Router. You can only use an IP address in the ranges 192.168.1.2 to 192.168.1.99 and
192.168.1.151 to 192.168.1.254.
6. Enter the Subnet Mask, 255.255.255.0.
7. Enter the Default Gateway, 192.168.1.1 (Router's default IP address).
8. Toward the bottom of the window, select Use the following DNS server addresses, and
enter the Preferred DNS server and Alternative DNS server (provided by your ISP). Contact
your ISP or go on its website to find the information.
9. Click the OK button in the Internet Protocol (TCP/IP) Properties window. Click the OK button
in the Local Area Connection Properties window.
I want to test my Internet connection.
WRVS4400N User Guide
Common Problems and Solutions
122