Table of Contents
Advertisement
Quick Links
Operating Manual
(Translation of the original operating manual)
Keep for future reference!
V2 / EN / 01.03.2022
Table Press
System 28
System 22
28005277
22001636
28005279
22001768
28005520
Landsberger Straße 180 | 86507 Oberottmarshausen | Germany (Bavaria)
Phone 0049 (0) 82 03 / 96 07 - 0 | Fax 0049 (0) 82 03 / 96 07 - 33 | info@siegmund.com | www.siegmund.com
All texts, pictures and design elements are copyrighted by the Bernd Siegmund GmbH. No part of this flyer may be edited analogously or digital or in another mode,
may be multiplicated or published out of the flyer without written approval of the legal owner. Offences are prosecuted.
System 16
16003238
16003240
16003352
Bernd Siegmund GmbH
Advertisement
Table of Contents
Related Manuals for Siegmund System 22
Summarization of Contents
About This Manual
Manual Validity
Specifies the validity of the assembly and operating manual for listed products.
Symbols and Markings
Explains signal words, notes, and danger levels used in warning notices.
Symbols Used on Unit
Details warning signs and mandatory signs according to ASR A1.3 and DIN standards.
Safety Instructions
Intended Use
Describes the unit's purpose for clamping workpieces with specific force limits.
General Safety Instructions
Provides essential guidelines for safe assembly, operation, and handling to prevent injury.
Safe Handling
Details precautions for operating the unit, preventing crushing risks and transport hazards.
Assembly
Structural Conditions
Specifies requirements for mounting fixtures and using appropriate mounting bolts.
Operation
Guides users on how to operate the unit using the pump and lowering levers safely.
Extension Operation
Describes the step-by-step process for extending the piston rod using the pump lever.
Retraction Operation
Explains how to retract the piston rod using the lowering lever and associated safety precautions.
Troubleshooting
Safety Against Overloading
Details the unit's protection system against excessive hydraulic pressure via a pressure relief valve.
Maintenance and Inspection
Maintenance
States the unit is maintenance-free but advises visual inspection for damage and defects.
Inspection
Recommends replacing seals every 6 years and contacting the dealer.
Fire Protection
Discusses fire risks with flammable hydraulic fluids and suitable extinguishing agents.
Need help?
Do you have a question about the System 22 and is the answer not in the manual?
Questions and answers