Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Draper 23782
Summary of Contents for Draper 23782
- Page 1 Original Instructions Version 1 12/24V 3000A JUMP STARTER 23779, 23782...
-
Page 2: Product Reference
All photographs and drawings within this manual are document is part of the product; retain it for the life supplied by Draper Tools to help illustrate correct of the product, passing it on to subsequent holders. operation of the product. -
Page 3: Table Of Contents
2. Contents 1. Preface 1.1 Product Reference 1.2 Revisions 1.3 Understanding the Safety Content of This Manual 1.4 Copyright © Notice 2. Contents 3. Product Introduction 3.1 Intended Use 3.2 Specification 4. Explanation of Symbols 5. Health and Safety Information 5.1 General Health and Safety Precautions 5.2 Additional Safety Instructions for Jump Starters 5.3 Working With Lead-Acid and... -
Page 4: Product Introduction
12V DC supply. Part of our core range, this product is suitable for regular use by enthusiasts and tradespersons alike. 3.2 Specification Stock No.: 23779 23782 Part No.: GT12 GT24 Rated voltage: 12V/24V... -
Page 5: Explanation Of Symbols
4. Explanation of Symbols Reverse polarity protection Read the instruction manual Short-circuit protection Mandatory action required Net product weight (23782 only) Warning! Warning Electrical hazard – Lead-acid content risk of electrocution! WEEE – Waste Electrical & Electronic Equipment Do not incinerate or throw onto fire Do not dispose of Waste Electrical &... -
Page 6: Health And Safety Information
NOT disassemble or modify it in any way. • DO NOT use this product near devices that may cause • ONLY use spare parts supplied by Draper Tools. sparks. • DO NOT use this product if you are tired or under the • This product may become warm during extended... -
Page 7: Working With Lead-Acid And Other Vehicle Batteries
• NEVER smoke or allow sparks or flames in the vicinity immediately and contact Draper Tools for support. of the battery or engine. − If battery acid comes into contact with your skin, ... -
Page 8: Residual Risk
If the power supply cord is damaged, it must be replaced by Draper Tools, an authorised service agent or similarly qualified personnel in order to avoid a hazard. The damaged or incomplete plug, when cut from the cord, shall be disabled to prevent connection to a live electrical outlet. -
Page 9: Identification And Unpacking
6. Identification and Unpacking 6.1 Product Overview Stock No.23782 (10) (12) (11) 2 × 12V DC output socket Test button Carry handle Reverse alarm light Battery charge indicators (+) Positive jump start lead and clamp (red) 12V/24V jump start selector (10) (-) Negative jump start lead and clamp (black) Charging socket (11) Clamp storage holders Charging status light... -
Page 10: Packaging
6. Identification and Unpacking 6.2 Packaging WARNING! Keep packaging materials out of Keep the product packaging for the duration of the reach of children. Dispose of packaging warranty period for reference should the product need to correctly and responsibly and in accordance be returned for repair. -
Page 11: Charging Instructions
7. Charging Instructions 7.2 Checking Jump Starter Battery Status Important: Read and understand all the safety information in this manual before attempting to charge 1. Press the TEST button (2) to check the voltage status or operate this product. of the Jump Starter battery. CAUTION! This product MUST be charged for at least 48 hours immediately after purchase and at least once every two months thereafter. -
Page 12: Operating Instructions
8. Operating Instructions Important: Read and understand the safety information 5. Start the engine for 3 – 5 seconds. If the engine does and instructions in this manual in full before attempting not start within 10 seconds, stop, and wait 4 minutes to operate this product. -
Page 13: Maintenance And Troubleshooting
ONLY by suitably qualified − Ensure that all port covers are closed and sealed personnel authorised by Draper Tools. when storing the product. − Ensure that there are no metallic objects nearby ... -
Page 14: Spares, Returns And Disposal
Draper Tools Product Helpline for details of your nearest authorised agent. Draper Tools will endeavour to hold any spare parts, if applicable, for seven years from the date that it sells the final matching stock item. -
Page 15: Warranty
Proof of purchase must be provided. Your Draper Tools guarantee is not effective until you can If, upon inspection, it is found that the fault occurring is produce, upon request, a dated receipt or invoice to due to defective materials or workmanship, repairs will verify your purchase within the guarantee period. -
Page 16: Contact Details
Telephone Sales Desk: +44 (0) 23 8049 4333 General Enquiries: +44 (0) 23 8026 6355 General Fax: +44 (0) 23 8026 0784 Please contact the Draper Tools Product Helpline for repair and servicing enquiries. © Published by Draper Tools Limited © Published by Draper Tools Limited...
Need help?
Do you have a question about the 23782 and is the answer not in the manual?
Questions and answers