Advertisement
Quick Links
DISTRIBUTION UNIT
Type 138- -118 NG003 E00/E01/E02
1 Description
2 Installation
4008.DOC010302 Edition:
May 2019
Raytheon Anschütz GmbH
Postfach 1166
D - - 24100 Kiel
Germany
Tel +49- -4 31- -30 19- -0
Fax +49- -4 31- -30 19- -501
Email Service@raykiel.com
www.raytheon- -anschuetz.de
Advertisement
Related Manuals for Raytheon Anschütz 138-118 NG003 E01
Summarization of Contents
General Unit Information
1.1 CAN Bus Principles
Explains the Controller Area Network (CAN) bus functionality.
1.2 Power Distribution System
Details how power is distributed within the unit.
1.3 Signal and Data Processing
Describes how signals and data are handled.
1.4 Alert and Status Management
Outlines the system's alert and status handling mechanisms.
1.5 Technical Specifications
Covers mechanical and electrical specifications.
1.5.1 Mechanical Specifications
Specifications related to physical dimensions and construction.
1.5.2 Electrical Specifications
Electrical characteristics, power consumption, and inputs/outputs.
1.6 Component Identification
Details LEDs, buttons, switches, plugs, fuses, and connectors.
1.6.1 Terminal Board L1
Describes the terminal board for supply and protection.
1.6.2 Interface PCB (NB06-333)
Information about the interface PCB (NB06-333).
1.6.2.1 External Sensor Connectivity
How to connect external sensors to the interface PCB.
1.6.3 I/O PCB (NB06-332)
Information about the I/O PCB (NB06-332).
Installation and Connections
2.1 General Installation Guidelines
General guidance and precautions for installation.
2.1.1 Establishing Earth Connection
Instructions for establishing a proper earth connection.
2.2 Unit Mounting Procedures
Mounting instructions for the distribution unit.
2.2.1 Optional Component Installation
Guidance on installing optional components like output boxes.
2.3 System Interfacing
Details on connecting various interfaces and devices.
2.3.1 Heading Receiver Interface Setup
Connecting RS422 or NMEA heading receivers.
2.3.2 Serial Communication Standards
Information on supported serial interface telegrams.
2.3.3 Optional Function Connections
How to connect optional functions like Alert-Reset.
2.3.3.1 Alert Function Setup
Details on setting up alert functions.
Power Operations
3.1 Unit Power-On Procedure
How to power on the distribution unit.
Configuration and Settings
4.1 Jumpers and Switches
Setting physical jumpers and switches for termination.
4.2 DIP-Switch Configuration
Settings using DIP-switches for various functions.
4.2.1 Interface PCB DIP-Switch B4
Configuring DIP-Switch B4 on the Interface PCB.
4.2.1.1 DIP-Switch B4 and Button Operation
How to use DIP-Switch B4 and buttons for mode selection.
4.2.1.2 CAN Bus Addressing Configuration
Configuring CAN Bus addresses for devices.
4.2.1.3 Output Channel Interface Settings
Adjusting the 12 output channels' interfaces.
4.2.1.4 Heading Difference Smoothing
Configuring the "smooth elimination" of heading differences.
4.2.1.5 NMEA Output Format Adjustment
Setting up NMEA formats for output channels.
4.2.1.6 Rate of Turn Output Scaling
Scaling Rate of Turn (RoT) analog and NMEA outputs.
4.2.1.7 Magnetic Compass Configuration
Configuring the unit to support a magnetic compass.
4.2.2 I/O PCB DIP-Switch B45
Configuring DIP-Switch B45 on the I/O PCB.
4.2.2.1 DIP-Switch B45 Usage
How to use DIP-Switch B45 settings.
4.3 DV Bus Addressing Setup
Information on setting DV Bus addresses.
System Procedures
5.1 Software Update Process
Steps for flashing new software.
5.2 Configuration Change Handling
How to handle configuration changes and new components.
Power Management
6.1 Unit Power-Off Procedure
How to power off the distribution unit.
Maintenance and Troubleshooting
7.1 Error Diagnostics
How errors are displayed and basic troubleshooting.
Service Mode Operations
8.1 DIP-Switch Service Settings
Using DIP-switches for service mode operations.
Need help?
Do you have a question about the 138-118 NG003 E01 and is the answer not in the manual?
Questions and answers