Table of Contents
Advertisement
10
C
ONTENTS
Due to packaging restriction the ECHO product you have purchased requires some assembly.
After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missing
parts. Use the contents list to check for missing parts.
__ Power Head
__ Drive Shaft Assembly
__ Cutting Attachment W/ Guide Bar and Saw Chain
__ Operator's Manual
__ Safety Manual
__ Warranty Registration Card
__ Warranty Statement
__ T-Wrench (combination screwdriver/spark plug socket)
__ 4 mm hex wrench
__ Safety Glasses
TM
__ Echo Power Blend
__ Shoulder Harness
__ Guide Bar Cover
A
SSEMBLY
Tools Required: 10x19mm (13/32x3/4in) T-wrench, 4 mm Hex
Wrench, 8 x 10mm Wrench
Parts Required: Power Head, Drive Shaft Assembly,
Cutting Attachment
/
DRIVE SHAFT
1.
Loosen bolt (A).
2.
Remove protective cap from drive shaft end.
3.
Align flexible drive shaft coupler (B) with engine socket and slide
together until engine rests against lower drive shaft adapter (C).
IMPORTANT
Painted end of flexible drive shaft coupler must always be
installed in engine socket when assembling engine to drive shaft.
4.
Rotate lower drive shaft to align engine and rear handle assembly in
an upright position.
5.
Tighten bolt (A) securely so engine will not rotate on lower shaft
tube.
2-stroke oil sample
POWER HEAD
B A
C
A
Advertisement
Table of Contents
