Download
Share
Print this page
Follett ITS2250SG Installation, Operation, And Parts Manual
  1. Manuals
  2. Brands
  3. Follett Manuals
  4. Industrial Equipment
  5. ITS2250SG
  6. Installation, operation, and parts manual
Follett ITS2250SG Installation, Operation, And Parts Manual

Follett ITS2250SG Installation, Operation, And Parts Manual

Ice storage and transport systems with smartgate
Hide thumbs

Advertisement

Quick Links

Download this manual
Order parts online
www.follettice.com
ITS1350-60
Following installation, please forward this manual to the
Ice Storage and Transport Systems
Installation, Operation and Parts Manual
appropriate operations person.
801 Church Lane • Easton, PA 18040, USA
Toll free (800) 523-9361 • (610) 252-7301
Fax (610) 250-0696 • www.follettice.com
with SmartGATE
ITS2250-60
®
00147694R00

Advertisement

loading
Need help?

Need help?

Do you have a question about the ITS2250SG and is the answer not in the manual?

Questions and answers

Related Manuals for Follett ITS2250SG

Summary of Contents for Follett ITS2250SG

  • Page 1 ® Installation, Operation and Parts Manual Order parts online www.follettice.com ITS2250-60 ITS1350-60 Following installation, please forward this manual to the appropriate operations person. 801 Church Lane • Easton, PA 18040, USA Toll free (800) 523-9361 • (610) 252-7301 Fax (610) 250-0696 • www.follettice.com...

  • Page 3: Table Of Contents

    Follett receives the equipment at the factory in Easton, PA within 30 days after issuance of the return authorization number. The equipment must be returned in Follett packaging. If the packaging has been damaged or discarded, Follett will forward, at the customer’s expense, new packaging.

  • Page 4: Welcome To Follett Corporation

    Before you begin After uncrating and removing all packing material, inspect the equipment for concealed shipping damage. If damage is found, notify the shipper immediately and contact Follett Corporation so that we can help in the filing of a claim, if necessary.

  • Page 5: Installation

    Installation Uncrating and installing base section 1. Remove paddle from skid by cutting plastic straps. 2. Remove screws holding flanged feet and tie-down straps to skid and remove skid. 3. Remove packing material from inside of legs and around shutter door. 4.

  • Page 6: Sealing Bin Interior

    Sealing bin interior The joint between base and bin sections must be sealed with silastic to prevent leakage and/or ice contamination and potential voiding of warranty. One or more shutter doors may need to be removed to seal bin. 1. Support shutter door(s) with one hand and remove thumbscrews from side of shutter door(s) at underside of base.

  • Page 7: Reinstalling Door Assembly

    Reinstalling door assembly 1. Reinstall lower door assembly in bin opening. 2. Reinstall three or four (3 or 4) screws in hood at top of door assembly. 3. Reinstall SmartGATE in side panel tracks and push down to seat. 4. With door closed insert one door stud through hinge bracket. Note: For proper operation the access door must be reinstalled in the closed position.

  • Page 8: Operation

    Operation Ice Transport System Operation Pushing cart into bay Loading ice 1. PUSH cart all the way to back. 1. PULL shutter handle open. 2. Store handle up against bin. Pulling cart out Transporting ice 1. PUSH shutter handle closed. 1.

  • Page 9: Breaking Ice Bridges

    Breaking ice bridges t may be necessary to use the paddle to break up ice bridges that occur along the sides and in the middle of the bin. This often happens if ice has been held in storage for a period of time without use. Use supplied paddle accessory to break up bridges Do NOT dig up at ice.

  • Page 10: Cleaning

    Interior of bin must be cleaned and sanitized prior to use, and should be cleaned on routine basis during use. Interior bin care Follett ice storage bins with SmartGATE are equipped with polyethylene liner walls which should be cleaned and sanitized periodically with Ecolab Mikro-chlor Cleaner or any product suitable for use in a food zone.

  • Page 11: Exterior Bin Care

    & Polish or equivalent. Technical assistance available toll free Should you have any questions concerning installation or maintenance of Follett ice storage bins, please call our technical service department at (800) 523-9361 or (610) 252-7301 between 8 a.m. and 5 p.m. Eastern time.

  • Page 12: Replacement Parts

    Replacement parts Reference # Description Part # Track, inspection window, 42" (used with 502237 window) - 3200/2250 501277 Inspection window, 21.125"W x 8.625"H (2 used per bin) - 3200/2250 502237 Frame assembly, lower door, 45" (includes 502177 & 502182) 502361 Door, outer lift, 45"...
  • Page 13 Drain system Reference # Description Part # Drain pan upper – includes (2) 501100 00147652 Vertical drain tube – sold per foot 205149 Bumper, and stud – includes 502865 502849 Cap, bumper 502865 00147678...
  • Page 14 Shutter door assembly Multi-bay joint cover Reference # Description Part # Track shutter door – includes (2) 502272, (8) 501100 502864 Thumbscrew, 10-32 X 1/2" 501100 Bearings (2), shutter door, nylon 11-7/16" – includes (4) 501100 502269 Shutter door – (includes 502857 and (2) 502272) 00147660 Assembly, handle, shutter door –...
  • Page 16 SmartGATE is a registered trademark of Follett Corporation, registered in the US. 801 Church Lane • Easton, PA 18044, USA Toll free (800) 523-9361 • (610) 252-7301 00147694R00 Fax (610) 250-0696 • www.follettice.com 10/10...