Related Manuals for UNI-T UDP6730
Summarization of Contents
Perface
Copyright Information
Copyright and trademark details for Uni-Trend Technology.
Warranty Service
Details warranty period, conditions, and customer responsibilities for service.
Limited Warranty and Liability
Safety Information
General safety precautions to avoid electric shock and personal injury.
Product Series
Characteristics
Lists key features and specifications of the power supply.
Basic Performance
Explains the performance capabilities and application examples.
Specifications
Front Panel
Identifies and explains the components of the front panel.
Rear Panel
Packing List
Lists the included components and accessories.
Requirements of Power Supply
Specifies voltage, frequency, and fuse requirements.
Operating Environment
Cleaning
Provides instructions for cleaning the instrument safely.
Quick Start
Apparance Inspection
Steps for inspecting the instrument upon delivery.
Voltage Setup
Current Setup
Steps to set the output current value using interface controls.
Enable Output
Keyboard Lock
Explains how to enable and disable the keyboard lock function.
OVP Function
OCP Function
Details how to set and enable Over-Current Protection (OCP).
Bepper Switch
Brightness Setup
Instructions on how to adjust the display brightness.
Memory Group Setup
Memory Group Voltage/Current Setup
How to save and recall voltage/current settings using memory keys.
Output Mode Setup
Language Setup
Steps to change the display language between English and Chinese.
Display Interface Information
About
Shows product model and firmware version information.
Remote Sense Compensation Setup
CV/CC Operating Mode of Power Supply
Explains constant voltage/current transfer and operation.
Troubleshooting
Provides solutions for common issues like no output or non-working keyboard.
Remote Communication
Remote Control Interface & Operating Instructions
Details the software interface and how to operate remotely.
List Mode (Time Function) and Delayer Mode
Operating Steps
Step-by-step guide for using List and Delayer modes.
Parameter Setting of List Mode
How to configure parameters for List Mode.
Menu introduction of list mode
Parameter Setting of Delayer Mode
How to configure parameters for Delayer Mode.
ProtectOption
Table setting
Explains table configuration for status and delay time.
Need help?
Do you have a question about the UDP6730 and is the answer not in the manual?
Questions and answers