Related Manuals for AFRISO 44502
Summarization of Contents
Information on safety
Safety messages and hazard categories
Explains hazard categories (DANGER, WARNING, NOTICE) and safety alert symbols.
Intended use
Details the product's intended applications and lists suitable liquids.
Predictable incorrect application
Lists situations and purposes for which the product must not be used.
Qualification of personnel
Specifies requirements for personnel authorized to work with the product.
Personal protective equipment
Emphasizes wearing required PPE and considering site-specific hazards.
Modifications to the product
States that only explicitly described modifications are permitted.
Product description
Overview
Describes the product's components: control unit and photoelectric/floating probes.
Photoelectric probe
Details the photoelectric probe's function, components, and detection mechanism.
Floating probe
Explains the floating probe's function for level detection and its components.
Control unit
Details the control unit's housing, display elements, controls, and electronic components.
Pictograms
Explains the meaning and function of various symbols and LEDs used in the manual.
Dimensions
Provides dimensional drawings and measurements of the control unit.
Application example
Illustrates standard application scenarios for the oil/water alarm unit.
Relay output
Describes the product's output relay for transmitting alarm signals to external equipment.
Approvals, conformities, certifications
Lists the product's compliance with European directives and specific approvals.
Technical specifications
Photoelectric probe specifications
Details general and ambient specifications for the photoelectric probe.
Floating probe specifications
Provides general and ambient specifications for the floating probe.
Control unit specifications
Lists general, ambient, and electrical specifications for the control unit.
Mounting
Preparing mounting
Covers requirements for interstitial space and leakage containment before mounting.
Mounting the photoelectric probe
Instructions for correctly mounting the photoelectric probe, including position and strain relief.
Mounting the bracket
Details how to mount the bracket for the probe to a wall or container.
Mounting the floating probe
Instructions for mounting the floating probe at the required switching point.
Mounting the control unit
Guidance on mounting the control unit to the wall, including types A and B.
Replacing the rubber piece by a cable gland
Instructions for replacing the center rubber piece with a cable gland for additional equipment.
Electrical connection
Detailed safety instructions and procedures for making the electrical connection.
Power supply control unit
Explains how to connect the power supply to the control unit using wiring diagrams.
Connecting the probes
Instructions for connecting photoelectric and floating probes to the control unit terminals.
Adjusting the alarm of the floating probe
Describes how to adjust the floating probe alarm using the coding plug J1.
Relay output
Explains how to connect additional equipment to the control unit's alarm output.
Commissioning
Commissioning the product
Steps to verify prerequisites and apply voltage for product commissioning.
Performing the function test
Detailed procedure for testing the photoelectric and floating probes and the control unit.
Operation
Alarms
Describes leakage and level alarms, including LED indicators and audible signals.
Acknowledging an alarm
Instructions on how to mute the audible alarm using the 'Acknowledge' key.
After an alarm condition
Procedures for checking probes after an alarm, including cleaning and function tests.
Use in flood hazard areas
Information on the product's suitability and limitations for use in flood hazard areas.
Maintenance
Maintenance intervals
Outlines recommended activities and their frequency for system maintenance.
Maintenance activities
Details specific maintenance tasks such as cleaning probes and replacing parts.
Replacing the mains fuse F1
Step-by-step guide for safely replacing the mains fuse F1.
Troubleshooting
Troubleshooting common problems
Lists common problems, possible causes, and repair steps for the product.
Decommissioning, disposal
Instructions for safely decommissioning and disposing of the product.
Returning the device
Guidance on how to contact the manufacturer before returning the device.
Warranty
Information on where to find terms and conditions related to product warranty.
Appendix
EU Declaration of Conformity
Presents the EU Declaration of Conformity for the product, listing relevant directives.
Additional requirements and information
Provides additional requirements and information from EN standards for compliant installation.
Need help?
Do you have a question about the 44502 and is the answer not in the manual?
Questions and answers