Using The Radio; Connecting The Radio; Fm Mode; Scanning For Station In Fm Mode - Tangent CINQUE CD/FM Radio Manual

Using the radio

Connecting the radio

Place the radio on a plain surface. Connect the included adaptor to the radio.
Check that all other connections have been made correctly before inserting the mains plug
into the wall socket. Check that the mains voltage is correct according to the voltage stated
on the adaptor before turning on the power.
The Tangent Cinque will go into standby and is ready for use.
Turn the unit on by pressing the power button on the front panel. The display will show the
message below.
When the radio is in standby, you can see what mode the radio will start up in, when it is
turned on next time. The radio will display either FM and the time or AM and the time. The
display will not be as brightly illuminated in standby mode, as when the unit is turned on.

FM mode

When the radio is on, select FM mode by pressing the MODE button until the message
below appears in the display.

Scanning for station in FM mode

To scan for stations in FM mode, press the SEEK+ or SEEK- buttons to scan either up or
down in frequencies. The radio will then search for the first coming available station, and
stop when it has found that.
It is also possible to tune manually by pressing the TUNE LEFT or TUNE RIGHT buttons or
turning the TUNE button on the front panel. Turn the TUNE button on the front panel
clockwise to tune up in frequency and counter clockwise to tune down in frequency.
12