Advertisement
Advertisement
Table of Contents
Related Manuals for Asus ProArt H7604J Series
Summarization of Contents
Copyright and Support Information
Copyright Information Details
Details the copyright terms and conditions for the manual's content.
Limitation of Liability Statement
Outlines the extent of ASUS's liability regarding the product and manual.
Service and Support Resources
Provides links and information for obtaining technical assistance and support.
Service Overview and Safety Precautions
General Service Guidelines
Provides an overview of service procedures and responsibilities.
Handling Precautions
Essential safety measures for handling electronic components and the device.
Environmental and Component Care
Instructions on maintaining a suitable environment and caring for components.
Pre-Repair Preparation Checklist
Pre-Repair Checklist Items
Key steps to perform before starting any repair procedures.
Important Notes for Service
Crucial advice regarding uncertainty, component sourcing, and procedure accuracy.
Device Overview and Component Identification
External Views and Ports
Diagrams illustrating the device's external layout and port locations.
Top View Component Labels
Labels for components visible from the top of the device.
Bottom View Component Labels
Labels for components visible from the bottom of the device.
Side and Rear Port Identification
Identification of ports on the left, right, and rear sides.
Top View Components Catalog
OLED, Keyboard, and Main Board
Images and labels for major top-view components like OLED, keyboard, and main board.
Battery, SSD, and Thermal Module
Images and labels for battery, SSD, and thermal module components.
Other Top Case Components
Identification of various smaller components found on the top case.
Bottom View Components Catalog
Bottom Case and I/O Board
Images and labels for the bottom case and I/O board.
Thermal Module and Other Bottom Components
Images and labels for the thermal module and other bottom-mounted parts.
Repair Procedures Introduction
Repair Overview and Safety
General overview of the disassembly/assembly process and precautions.
Screw Criteria and Part Reference
Guidelines for screw condition and notes on part number referencing.
Essential Tools for Repair
Screwdrivers and Prying Tools
Lists necessary screwdrivers and plastic tools for disassembly.
Handling and Thermal Application Tools
Includes static control items, tweezers, and thermal interface materials.
Bottom Case Disassembly and Reassembly
Bottom Case Screw Removal
Step-by-step instructions for removing screws from the bottom case.
Prying the Bottom Case
Visual guide on how and where to safely pry the bottom case open.
Bottom Case Screw Specifications
Details screw types, quantity, and torque for bottom case assembly.
Battery Connector Handling
Disconnecting the Battery Connector
Procedure for safely disconnecting the battery connector from the motherboard.
Connecting the Battery Connector
Procedure for safely reconnecting the battery connector.
SSD Module Service
Removing the SSD
Steps to remove screws, SSD, and thermal pad.
Installing the SSD
Steps to install a new SSD, including thermal pad and angle considerations.
Memory Module Service
Removing the Memory Module
Steps to remove memory modules and the absorber.
Installing the Memory Module
Steps to install new memory, absorber, and graphite.
Battery Replacement Procedure
Removing the Battery Pack
Steps to remove screws and the main battery pack.
Battery Assembly Note
Reminder to apply new battery foil during reassembly.
WLAN Card Replacement
Disconnecting WLAN RF Cables
Steps to disconnect RF cables from the WLAN card.
Removing the WLAN Card
Steps to remove the screw and the WLAN card.
Antenna Cable Assembly Guidance
Instructions for correctly routing and connecting antenna cables.
Encoder Switch Assembly Service
Disconnecting Encoder FFC
Steps to disconnect the encoder FFC from the motherboard and switch.
Removing the Encoder Switch Assembly
Steps to remove screws and the encoder switch assembly.
Encoder Switch Assembly and Curing
Procedure for reassembling knob cap and holder, with curing time.
Main Board (MB) Service
Disconnecting MB Cables and FFCs
Steps to disconnect various cables and FFCs from the main board.
Removing the Main Board
Steps to remove screws and the main board assembly.
FFC Damage Warning and Replacement
Warning about FFC damage and the importance of replacement.
Thermal Module and Fan Service
Removing the Thermal Module
Steps to loosen screws and remove the thermal module with fan.
Thermal Module Screw Notes
Guidance on specific screws for thermal module removal.
Main Board Connector Layout
Main Board Connector Identification
Diagram showing the location of all connectors on the main board.
Main Board Material Details
GPU, CPU, and WLAN Material Labels
Identifies mylar and kapton materials used on critical board areas.
Main Board Back Material Details
CPU GPU Bracket and RF Absorber
Identifies CPU GPU bracket and RF WLAN absorber materials.
IO Board Disassembly
Removing IO Board Screws
Steps to remove the screws securing the IO board.
Detaching the IO Board
Steps for removing the IO board from the laptop chassis.
Speaker and Antenna Set Service
Removing Speaker Wi-Fi Antenna Set
Steps to remove the speaker and Wi-Fi antenna assembly.
Cable Management for Assembly
Guidance on tidying cables when reassembling the speaker/antenna set.
LED Board and Touchpad Module Service
Removing the LED Board
Steps to disconnect FFCs, remove screws, and detach the LED board.
Removing the Touchpad Module
Steps to remove screws and detach the touchpad module.
FFC Damage Warning
Warning regarding FFC damage during disassembly and the need for replacement.
Keyboard Module Replacement
Disassembling the Keyboard Module
Steps to pry, remove deco, screws, and the keyboard module.
Hinge Cap Removal Procedure
Steps to remove hinge caps as part of keyboard module service.
Touch Panel Control Board Service
Removing Touch Panel Components
Steps to remove LCD deco, cable, and disconnect connectors.
Touch Firmware Update Advisory
Advisory on updating touch firmware after component replacement.
Need help?
Do you have a question about the ProArt H7604J Series and is the answer not in the manual?
Questions and answers