How To Use The Map; How To Read The Map Screen - Pioneer AVIC-Z140BH Operation Manual

How to use the map

Most of the information provided by your navigation system can be seen on the map. You need to be-
come familiar with how information appears on the map.

How to read the map screen

This example shows an example of a 2D map screen.
1
2
3
4
5
6
7
p Information with an asterisk (*) appears
only when the route is set.
p Depending on the conditions and settings,
some items may not be displayed.
1 Name of the street to be used (or next gui-
dance point)*
2 Next direction of travel*
As you get closer to the guidance point, the
color of the item changes to green.
p Touching this item enables you to hear
the next guidance again.
p You can select between display and
non-display.
= For details, refer to Displaying man-
euvers on page 166.
3 Distance to the guidance point*
Shows the distance to the next guidance
point.
p Touching this item enables you to hear
the next guidance again.
4 Second maneuver arrow*
8
Shows the turning direction after next gui-
dance point and the distance to there.
= For details, refer to Displaying maneu-
vers on page 166.
5 Map control
Touching
changing the map scale and the map orienta-
tion.
6 Current position
Indicates the current location of your vehicle.
The apex of the triangular mark indicates your
orientation and the display moves automati-
cally as you drive.
p The apex of the triangular mark is the
proper current position of the vehicle.
7 Eco-Meter
Displays a graph comparing the past average
fuel mileage and the average fuel mileage
since the navigation system was last started.
= For details, refer to Displaying the fuel
consumption information on page 167.
g
f
e
d
c
b
9 a
displays touch panel keys for
Chapter
04
29
En