Table of Contents
Related Manuals for Riedex DM-300 RV
Summary of Contents for Riedex DM-300 RV
- Page 1 D U S T E X T R A C T I O N S Y S T E M S DM-250 RV DM-300 RV DM-350 RV Manufacturer: Riedex BV Hoofdstraat 17 NL 8811 HD RIED Tel. +31 (0)517 26 92 41 e-mail: info@riedex.nl...
- Page 2 The manufacturer rejects all liability for damage re- sulting from the use of the extraction unit or the information given in this instruction manual. © 2020, Riedex BV, the Netherlands. No part of this publication may be copied or made public by print, photocopying, microfilm, electro- nic or in any other way without prior written per- mission to do so.
-
Page 3: Table Of Contents
table of contents able of conTenTs chapter page Table of conTenTs useR Manual geneRal safeTy RegulaTions safeTy RegulaTions foR MainTenance RepaiRs anD aDjusTMenTs safe woRk MeThoD DescRipTion of The Machine insTallaTion MainTenance MalfuncTions Recycling annexes dm-250rV technichal drawing dm-250rV spare parts dm-300rV technichal drawing dm-300rV... -
Page 4: User Manual
user manual useR Manual WARNINGS AND SYMBOLS The following warnings and symbols are used in this manual: Gives suggestions and advice so The warnings contain important information. as to make certain tasks easier or Make sure everybody who uses the extraction more convenient. - Page 5 user manual USER MANUAL This instruction manual describes the installati- on, operation, use and maintenance of the ex- NOTE traction unit. In some instances, the diagrams and drawings that have been used may deviate from the actual situation. Read this instruction manual carefully! Follow the instructions before using the extraction unit.
-
Page 6: Warranty
user manual USERS The term ‘user’ is defined as anyone who ope- rates, maintains, adjusts, cleans, repairs or per- forms any other work on or with the extraction unit. This user manual on the use of the extraction unit must be handed to the user, taking their level of education into consideration. -
Page 7: General Safety Regulations
safety geneRal safeTy RegulaTions The extraction unit meets all the relevant safe- ty regulations and has, therefore, been awarded WARNING the CE mark. Observe the general safety Various technical measures have been taken in regulations. accordance with the CE guidelines and harmoni- zed standards so that the extraction unit meets the safety requirements based on the current state of technology. - Page 8 safety GUARDS Before using the extraction unit, fit all the doors DANGER and hatches to the machine and secure them using the correct attachment aids. RISK OF FIRE AND EXPLOSION Avoid sparks or other possible sour- VISITORS AND CHILDREN ces of ignition at all times. Suction Keep visitors and, in particular, children, who are hoses must be electrically conduc- not aware of the dangers, away from the extrac-...
-
Page 9: In Case Of Fire
safety WORK AREA Ensure the work area is safe when the extraction unit is in use. Keep a safe distance from the suc- WARNING tion openings. FIRE RISK! TOOLS Incorrect installation and opera- Always use the correct tools for the job at hand. tion can cause a fire. -
Page 10: Original Accessories
safety ORIGINAL ACCESSORIES Replacement parts and accessories must meet NOTE the requirements specified by the manufacturer. Therefore, only use original replacement parts and original accessories or the replacement parts Any use of the machine outside of its and accessories approved by the manufacturer. intended use is prohibited and is con- sidered improper. - Page 11 When the 10 years have expired, the modules can be exchanged for new copies. When the Fire Knock Out is activated, the unit must be inspected and put into operation by an official Riedex dealer.
-
Page 12: Safety Regulations For Maintenance , Repairs And Adjustments
safety safeTy RegulaTions foR MainTenance RepaiRs anD aDjusTMenTs HOISTING Always take the weight of components into con- WARNING sideration whenever they are hoisted. Use the correct tools and employ a safe hoisting method. Never stand or walk under hoisted components. Always observe the safety regulations Falling objects may cause serious injury. -
Page 13: Safe Work Method
safety safe woRk MeThoD OPERATORS The machine operators must read this instruc- tion manual so that they can use the extraction WARNING unit safely and correctly. Observe the following safety regulati- GENERAL INFORMATION ons to ensure the work is carried out Always start the extraction unit first before using safely. -
Page 14: Sound Pressure Level
safety SOUND PRESSURE LEVEL The sound pressure level of the machine is less than 70 dB (A)*. Hearing protection is recom- mended or prescribed in conjunction with other machines installed on the shop floor. We refer to the local legislation of the user's country. The specified sound pressure level values are emissi- on values of the extraction unit and therefore not safe workplace values. -
Page 15: Description Of The Machine
A CE-marked type plate with the data as shown than described in this manual is not in the adjacent figure is attached to the extractor permitted! unit. TECHNICAL DATA DM-250 RV DM-300 RV DM-350 RV DM-350 RV 15 kW Motor 5,5 kW... -
Page 16: Installation
installation insTallaTion TRANSPORT The extraction unit is delivered completely assem- bled. The shipment is on a pallet and the machine can be unloaded with a forklift. The device can be removed from the pallet through the forklift holes. Beware, the maximum allowable inclination of the unit is 10˚! Pay attention to the center of gravity when lifting (see illustrations on pages 27, 29 and 31). -
Page 17: Electrical Connection
installation ELECTRICAL CONNECTION The extraction unit requires a 400 V, 50 Hz three-phase power supply with zero and ground WARNING to function. As a pre-fuse, a fuse with class K20A (DM-250), K25A (DM-300), K32A, or (DM-350) must be used. Danger of electric current! Work on electrical equipment may only be carried out by qualified per- •... - Page 18 HAUPTSCHALTER CONTROL BOX INTERIOR transformer fuses Main switch/Emergency-off = switch off power duration reset fan BEDEUTUNG LAYOUT ZEICHNUNG - SCHRANK A Riedex B.V. reset valve Funktion Hoofdstraat 17 8811 HD Ried The Netherlands reset cleaning info@riedex.nl...
- Page 19 installation CONNECTING HOSE AND/OR PIPING When connecting a hose, only conductive and flame-retardant hoses may be used. It is impor- tant that the electrical connection between the For the operation of the filter cle- hose and the inlet of the extraction unit is pro- aning it is necessary to connect the per.
-
Page 20: Use
FIRST COMMISSIONING The following steps must be carried out during NOTE the initial commissioning of the extraction unit: DIRECTION OF ROTATION • Check the direction of rotation of the fan. This Stop the machine immediately if a must match the arrow stickers. A wrong direc- wrong direction of rotation is detec- tion of rotation can be recognized by a very ted, to prevent excessive heating. -
Page 21: Waste Disposal
WASTE DISPOSAL A build-up of material can form under the ro- tary valve (point formation), which, if not re- moved, can lead to blockage of the valve and Mechanical filter cleaning reduction of machine performance. Please Every time the extraction unit is swit- check this regularly. -
Page 22: Restrictions On Use
CONNECTING MULTIPLE MACHINES If more than one machine is connected to the ex- traction unit, each machine must be shut off with a slider from the extraction unit. Make sure that the sliders on the machines that are not being If the yellow 'pressure difference used are closed. -
Page 23: Maintenance
maintenance MainTenance PERIODIC MAINTENANCE The extraction unit is low in maintenance. The bearings of all applied motors are lubricated for WARNING life. Ongoing work: Repairing the extraction unit is only permitted by authorized and quali- DAILY: fied personnel, with sufficient trai- •... -
Page 24: Malfunctions
malfunctions MalfuncTions THE EXTRACTION UNIT WON'T START • No main voltage, check the fuses. WARNING • Main switch is set to 0/Off. • Error in the slider control (if used). See the cor- responding user manual. Do not work on the electrical com- ponents. - Page 25 disposal Disposal If, after many years of use, the extraction unit re- aches the end of its lifecycle, then remove it and dispose of it appropriately. Disconnect the ex- WARNING traction unit from the power supply by discon- necting the power from the machinery. Remove Be aware of possible risk of being cut the fuses from the machinery.
-
Page 26: Annexes
-250rV technical drawing dm annexes... -
Page 27: Spare Parts Dm-250Rv
-250rV spare parts dm 13 14 Pos Item no. Pce. Description F 162.100 Differential pressure switch Pos Item no. Pce. Description 2-pin three-phase motor F 160.370 F 169.500 Vibration motor 5,5 kW B5/1/2 M F 161.380 RRD-250 fan F 160.253 Forklift hole cover F 161.325 Inspection cover... -
Page 28: Technichal Drawing Dm-300Rv
-300rV technical drawing dm... -
Page 29: Spare Parts Dm-300Rv
-300rV spare parts dm 12 13 14 Pos Item no. Pce. Description F 162.100 Differential pressure switch Pos Item no. Pce. Description 2-pin three-phase motor F 160.370 F 169.500 Vibration motor 7,5 kW B5/1/2 M F 161.380 RRD-300 fan F 160.253 Forklift hole cover F 161.325 Inspection cover... -
Page 30: Technichal Drawing Dm-350Rv
-350rV technical drawing dm... -
Page 31: Spare Parts Dm-350Rv
-350rV spare parts dm 12 13 14 Pos Item no. Pce. Description F 162.100 Differential pressure switch Pos Item no. Pce. Description 2-pin three phase motor F 160.370 F 169.500 Vibration motor 11 kW 2-polig B5/1/2 M F 161.380 RRD-350 fan F 160.253 Forklift hole cover F 161.325... -
Page 32: Pneumatic Schedule For Compressed Air Cleaning
pneumatic schedule for compressed air cleaning Compressed air tank DM-120 t/m DM-250 DM-300 DM-350 DM-200 Content (liter) 15,1 18,6 22,9 Max. limit pressure Operating pressure Number of valves Pos. Item no. Description F200.001 Compressed air tank F200.002 Solenoid valve C25DD 1" 224 VD F200.003 Filter pressure regulator NL G½... -
Page 33: Eg-Declaration Of Conformity
Ried, The Netherlands, 17.8.2020 the CE mark. Any change to the machine that has not been agreed with us Ing. R. Faber, director Riedex BV will result in the immediate loss of the declaration of validity. The undersigned of this declaration is the authorized representative for com-... - Page 34 The undersigned of this declaration is the authorized representative for compiling the technical documenta- tion. Ried, The Netherlands, 17.8.2020 Ing. R. Faber, director Riedex BV...
-
Page 35: Notes / Repair History
noTes RepaiR hisToRy...
Need help?
Do you have a question about the DM-300 RV and is the answer not in the manual?
Questions and answers