Using Child Restraint With Built-In - Graco 8J00MTX - Nautilus 3- In 1 Toddler Car Seat Owner's Manual

9.0 Using Child Restraint WITH Built-in Harness
SUDDEN STOP OR CRASH. Snugly adjust the belts provided with this child restraint around your
child. A snug strap should not allow any slack. It lies in a relatively straight line without sagging. It
does not press on the child's flesh or push the child's body into an unnatural position.
1. Loosen the harness straps by lifting the
harness adjuster lever
the adjustment strap and pulling the straps
toward you .
2. Open harness clip
FAILURE TO PROPERLY ADJUST THE HARNESS STRAPS
FOR YOUR CHILD INCREASES THE RISK OF SERIOUS
INJURY OR DEATH IN THE EVENT OF A SHARP TURN,
at front of seat near
.
25