Advertisement
Quick Links
Advertisement
Related Manuals for ICON FIRES NERO 1450
Summary of Contents for ICON FIRES NERO 1450
- Page 1 NERO WALL MOUNTED FIRES User Manual...
- Page 2 Operating Manual Thank you for purchasing this Icon Fires product. Icon Fires is very safety conscious, we have taken every care in designing, manufacturing and assembling your Icon Fires NERO to ensure it operates effectively, efficiently and safely. In return we ask that you exercise care when using and installing this product and follow the instructions provided.
-
Page 3: Content Of Packaging
Installation Manual - qty 1 NOTE: Icon Fires does not supply the wall fixings for the Hanger Bracket to be fitted to the wall because these fixings may need to vary depending on the material that the wall is made of. Please consult your local building regulations or hardware specialist if you are... - Page 4 B = Wall Box C = Fascia D = MM E = Wall Excluding Including name Length Length Opening From Wall Box Depth Burner Full Burner NERO 1150 1150mm 900mm 800mm 170mm 134mm 28,5kg 43,25kg NERO 1450 1450mm 1200mm 1100mm 195mm 159mm...
- Page 5 2 - Wall Hanger Bracket Position A = Fascia B = Fascia C = Fixing D = Fixing E = Fixing F = Fixing Size Burner Length Height Position Position Position Position 800 mm 1150mm 590mm 265mm 620mm 60mm 530mm 1100 mm 1450mm 590mm...
-
Page 6: Installation Procedure
• Always make sure the room in which the Frame is situated in is well ventilated when the Frame is in use. • Position the Frame where it will not be affected by any breeze or draft, as this may affect the behaviour of the flame in an unpredictable manner. - Page 7 Perspective of Frame Exploded Step 1: After selecting an appropriate position for the Frame to be located, mark out and fasten the Wall Hanger Bracket to the wall. Slot for Wall Fixing NOTE: After hooking the Wall Box onto the Wall Hanger Bracket (Step 2), make sure that the Safety Clips (image below) supplied are fitted into the appropriate holes to prevent the Wall Box from accidentally becoming dislodged from the wall.
- Page 8 Step 2: Once the Wall Hanger Bracket is secured to the wall, hook the Wall Box onto the Wall Hanger Bracket and secure in place with the Safety Clips. Facia Assembly Clips Wall Hanger Bracket with Safety Clips in place (both ends).
-
Page 9: Cleaning And Maintenance
Step 4: Make sure that the burner is facing the right way as per image below. After the burner has been inserted hook the Fascia onto the Wall Box by aligning the four holes in the back of the fascia with the four hooks (Fascia assembly clips) on the front of the wall box. Fill the Slimline Burner with the appropriate fuel, ignite and enjoy. - Page 10 1. All warranty claims are subject to manufacturer’s review and acceptance. 2. Icon Fires warrants that it uses reasonable care and skill to ensure that its products are of reasonable quality. Icon Fires will at it's cost and in it's sole discretion: (i) remedy any defect or fault in any product purchased;...
- Page 11 QC Checklist Components Wall hanger bracket 1 of …..…..……………... Wall box 1 of ………….......... Burner tray 1 of ………………………………………. Manual 1 of…………………………………………… Safety clips 2 of ……………………………………... Checked by…………………………………………. www.iconfires.com...
Need help?
Do you have a question about the NERO 1450 and is the answer not in the manual?
Questions and answers