Table of Contents
Advertisement
Quick Links
Model: ICONIC 900 B
Version: HANGING MODEL
Date: 2025
Table of Contents
1.
Introduction
2.
Safety Information
3.
4.
5.
6.
7.
8.
9.
1. Introduction
Welcome to your ICONIC 900! This guide will help you set up and use your product. Please read all instructions carefully to
ensure proper usage and safety.
2. Safety Information
Important Safety Instructions
1.
Read Carefully: Read all safety instructions before using this product.
2.
Proper Usage: Only use the product as intended. Any misuse may result in damage or injury.
3.
Keep Away from Water: Avoid using the product near water or in damp conditions.
Thank you for purchasing this Icon Fires product. Icon Fires places the highest priority on safety of its products. Every care
has been taken in designing, manufacturing and assembling your ICONIC 900 to ensure it operates effectively, efficiently
and safely. Live-fire products must be treated with care. We ask that you exercise care when using this product and follow
the instructions below. Before using your ICONIC 900, please read all the information contained in this Operation Manual
carefully. Icon Fires cannot be held responsible for any damage or injury caused if these instructions are not followed.
Retain this Manual for future reference.
When using the ICONIC 900 fireplace, basic precautions should always be followed, including but not limited to the
following. Read all instructions and warnings before assembling and operating the ICONIC 900 fireplace.
Instruction Manual
THE ICONIC 900
SAVE THESE INSTRUCTIONS
IMPORTANT SAFEGUARDS
Advertisement
Table of Contents
Troubleshooting
Related Manuals for ICON FIRES ICONIC 900 B
Summary of Contents for ICON FIRES ICONIC 900 B
-
Page 1: Table Of Contents
SAVE THESE INSTRUCTIONS Thank you for purchasing this Icon Fires product. Icon Fires places the highest priority on safety of its products. Every care has been taken in designing, manufacturing and assembling your ICONIC 900 to ensure it operates effectively, efficiently and safely. - Page 2 IN AUSTRALIA IS IT MANDATORY FOR ALL PRODUCTS TO BE SUPPLIED WITH A FUEL CANISTER WHICH HAS A FLAME ARRESTOR. • ICON FIRES SUPPLIES A FUEL CANNISTER WITH A FLAME ARRESTOR IN THE AUSTRALIAN MARKET. WE RECOMMEND IN ALL MARKETS TO USE A FUEL CANNISTER WITH A FLAME ARRESTOR. •...
-
Page 3: Product Overview
3. Product Overview Included in the Box: The ICONIC 900 Combustion Chamber (Burner) The ICONIC 900 Removable Tray Bracket The ICONIC 900 Burner Mounting Plate The ICONIC 900 Shell The ICONIC 900 Connection Pole with Rotation The ICONIC 900 Hanging System Pole 250 mm The ICONIC 900 Hanging System Pole 500 mm The ICONIC 900 Hanging System Pole 1000 mm The ICONIC 900 Standard Ceiling Bracket... -
Page 4: Assembly Instructions
4. Assembly Instructions Before beginning with the assembly, please make sure you have read the manual carefully. Lay out all parts on a flat surface. Confirm all pieces are present according to the "Included in the Box" section. Continue steps as needed for complete assembly. THE ICONIC 900 –... -
Page 5: Operating Instructions
In Australia is it mandatory for all products to be supplied with a Fuel Canister which has a flame arrestor. Icon Fires supplies a fuel cannister with a flame arrestor in the Australian market and EZ Pour spout. We recommend in all markets to use a fuel cannister with a flame arrestor. -
Page 6: Minimum Distances
WARNING: • Aim opening away from flammable objects or surfaces. • Ceiling mounting surface must be load-bearing and be able to support a minimum mass of 500 kg / 330 lb or more. • Total product weight is 72 kg. MINIMUM DISTANCES: A - 10 cm - 4 in - min to non-combustible material B - 38 cm - 15 in –... - Page 7 NOTE: IN ALL CASES, THE ICONIC 900 MUST: • be installed onto load bearing material ONLY; • be installed in low traffic areas to avoid injury to persons moving around and to avoid the ICONIC 900 being bumped which may cause fuel to spill. •...
- Page 8 THE ICONIC 900 HANGING SYSTEM - INSTALLATION NOTE: The Iconic may only be fitted onto a load bearing surface that can handle 500KG or more. All fixings must be metal. When selecting your fixings, please consult the relevant Health and Safety regulations, as well as the relevant National Building Regulations set forward by the governing bodies of the country in which the installation is to occur.
- Page 9 THE ICONIC 900 CONNECTION WITH ROTATION When assembling the ICONIC 900 Shell to the ICONIC 900 Hanging System, the connection tube should be connected to the ICONIC Shell first. This will allow the ICONIC 900 Rotation device to screw into the remaining Hanging System. Position the ICONIC 900 Connection-Rotation Part’s threaded end onto the ICONIC Shell and secure from inside with first the washer, then the hex nut and finally the wing type nut.
- Page 10 THE ICONIC 900 SHELL AND BURNER - INSTALLATION & ADJUSTMENTS Position the Removable Tray Bracket over the threaded stud at the base of the ICONIC Shell and adjust according to the instructions on the following page before securing with hex nut. NOTE: adjustment instructions on the following page are critical to proper functioning of the Combustion Chamber.
- Page 11 In Australia is it mandatory for all products to be supplied with a Fuel Canister which has a flame arrestor. Icon Fires supplies a fuel cannister with a flame arrestor in the Australian market. We recommend in all markets to use a fuel cannister with a flame arrestor.
- Page 12 PROCEDURE IF BURNER IS OVERFILLED: In case of accidental overfilling of the Fuel Tank, follow these steps: • NEVER ignite the Combustion Chamber if it is filled past the FILLING LINE shown above. Remove the Combustion Chamber from the Chimenea, using the lifting Handles. •...
-
Page 13: Maintenance And Care
TO REFILL THE COMBUSTION CHAMBER NEVER REFILL OR IGNITE THE COMBUSTION CHAMBER WHEN IT IS IN A HOT STATE ! When refilling the Combustion Chamber, simply follow the same procedure indicated in the section headed “OPERATING THE ICON BURNER” taking note of the CAUTION and WARNING on this page. It is critical to the proper functioning of the Combustion Chamber that you do not overfill the fuel tank as indicated before. -
Page 14: Troubleshooting
Purchaser to Icon Fires of any such defect or fault in the product as soon as the Purchaser becomes aware of that fault or defect. -
Page 15: Customer Support
9. Customer Support For assistance, please contact customer support at: • Email: info@iconfires.com • Website: www.iconfires.com...
Need help?
Do you have a question about the ICONIC 900 B and is the answer not in the manual?
Questions and answers