Download
Share
Print this page
  1. Manuals
  2. Brands
  3. DAS AUDIO Manuals
  4. Speakers
  5. EVENT-115A
  6. Manual

DAS AUDIO EVENT-115A Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
EVENT-26A / EVENT-115A
www.dasaudio.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the EVENT-115A and is the answer not in the manual?

Questions and answers

Related Manuals for DAS AUDIO EVENT-115A

Summary of Contents for DAS AUDIO EVENT-115A

  • Page 1 EVENT-26A / EVENT-115A www.dasaudio.com...
  • Page 2 Before operating the device, please read the “Safety precautions” section of this manual. Retain this manual for future reference. Event Series User's Manual...
  • Page 3 8 x EVENT-26A + 4 x EVENT-115A (flown subs) Stacking EVENT-26A on EVENT-115A 8 x EVENT-26A + 4 x EVENT-115A Transporting 12 x EVENT-26A + 4 x EVENT-115A + 2 x EVENT-121A 9. Annex: 12 x EVENT-26A + 4 x EVENT-218A Line connections: unbalanced and balanced 6.
  • Page 4 Event Series User's Manual...

  • Page 5: Safety Precautions

    Use this product only in E1, E2, E3 or E4 environments according magnetic material. to EN55103-2. For EVENT-26A, the maximum safety height from floor to bottom Do not remove mains connector ground, it is dangerous and illegal. of enclosure when mounting on a TRD-2 tripod (it needs also AXS- Class I device.

  • Page 6: Declaration Of Conformity

    Declaration of conformity DAS Audio Group, S.L. C/ Islas Baleares, 24 - 46988 Pol. Fuente del Jarro - Valencia. Spain Declares that models EVENT-26A and EVENT-115A: Abide by essential objectives relating Directives: • Directiva de Baja Tensión (Low Voltage Directive) 2014/35/UE •...
  • Page 7 Event Series | Warranty products warrantied against manufacturing defect for a period of 24 months from date of purchase. The warranty excludes damage from incorrect use of the product. All warranty repairs must be exclusively undertaken by the factory or any of its authorised service centers. To claim a warranty repair, do not open or intend to repair the product.
  • Page 8 A comprehensive range Streamlined deployment of EVENT-26A arrays is possible thanks to the of accessories makes the EVENT-26A ideal for small to mid-size rental and innovative FSSTM (Fast Set Splay) rigging system developed to permit angle installation applications.
  • Page 9 EVENT-26A, they share a compatible rigging • High-efficiency Class D amplifier with SMPS Dual voltage mains for use system which allows the EVENT-26A to be flown from or stacked above the anywhere in the world EVENT-115A.
  • Page 10 Event Series | Configuration 2 x EVENT-26A + 2 x EVENT-115A MAIN MENU BACK AXS-EV26 No.of U: 1U DownFill: off AXC-ZT Processors Units TDR-7 Speaker cabling SC2 2m XLR microphone signal balanced cable MAIN MENU SC20 20m XLR microphone signal balanced cable...
  • Page 11 Event Series | Configurations 8 x EVENT-26A + 4 x EVENT-115A AX-EV26 MAIN MENU BACK PRESET: loud LPF: Top Processors Units Speaker cabling SC-1 1m XLR microphone signal balanced cable SC-20 20m XLR microphone signal balanced cable SC-05 0.5m XLR microphone signal balanced cable PWCONLINK-09 0.9m powerCON “jumper”...
  • Page 12 MAIN MENU PWCONLINK-09 0.9m powerCON “jumper“ NAC3FCB cable BACK Rigging frames PRESET: loud LPF: Top AX-EV26 Rigging bumper for EVENT-26A / EVENT-115A Dollies PL-EV115S Plywood transport dolly for EVENT-115A PL-EV26S Steel transport dolly for EVENT-26A PL-EV115S Event Series User's Manual...
  • Page 13 Event Series | Configurations 12 x EVENT-26A + 4 x EVENT-115A +2 x EVENT-121A MAIN MENU BACK PRESET: loud LPF: Top Processors Units MAIN MENU DSP-226 2 IN x 6 OUT digital signal processor BACK No.of U: <6U> DownFill: off...
  • Page 14 PWCONLINK-09 0.9m powerCON “jumper“ NAC3FCB cable LPF 80Hz Rigging frames LIMIT LEVEL LOW-PASS SIGNAL 80Hz AX-EV26 Rigging bumper for EVENT-26A / EVENT-115A series DAS Audio Group, S.L. (Va lencia) Model: EVENT- 121A MADE IN SP AIN 63Hz 100Hz CARDIOID OMNI...
  • Page 15 Event Series | Specifications Modelo EVENT-26A EVENT-115A Nominal LF Power Amplifier 200 Wpeak - 100 W continuos Class D Amplifier Nominal HF Power Amplifier 600 Wpico - 300 Wcontinuous 1200 Wpeak - 600 Wcontinuos Amplificador Clase D Class D Amplifier...
  • Page 16 Event Series | Line Drawing Event-26A Event Series User's Manual...
  • Page 17 Event Series | Line Drawing Event-115A Event Series User's Manual...
  • Page 18 Event Series | Amplifiers Event-26A Amplifier 1. Input XLR socket-type input signal connector. This is a balanced connector just like the OUTPUT connector with the following pin assignments: 1 or S =GND (ground) 2 or T =(+) Non inverted input 3 or R =(-) Inverted input 2.
  • Page 19 6. AC OUTPUT: PowerCon NAC3FCB connector for AC loop thru (see unit’s label)). Only use this equipment with an appropriate mains cord. Model: EVENT-26A AUDI O MANAGE ME NT FOR CONTINUED PROTECTION AGAINST RISK OF FIRE REPLACE...
  • Page 20 Event Series | Amplifier Event-115A Amplifier 1. Input 1/4” Jack+XLR combined socket-type input signal connector. This is a balanced connector just like the OUTPUT connector with the following pin assignments: 1 or S =GND (ground) 2 or T =(+) Non inverted input 3 or R =(-) Inverted input 2.
  • Page 21 CAU TION DO NOT EXPOSE S I H S I O selección de presets (Low Pass Filter, deep-loud, etc.) y DAS Audio Group, S.L. (Valencia) Model: EVENT-115A opciones (reset, dimming, etc.). AC INPUT AC OUTPUT F OR CONTINUE DP RO TE CTION...
  • Page 22 Event Series | DAScontrol and display navigation OPTIONSM ENU BACK BRIGHT:+ 10 FW v1.192 910 CONTRAST: MAIN MENU MAIN MENU OPTIONSM ENU No .ofU : BACK Delay:0 .0m <on> DIMMING: of f No .ofU :1U OPTIONS Do wnFill:o ff MENU LOCK:off da rk Do wnFill:o ff BACK...
  • Page 23 MENU LOCK:o ff Top: recommended BACK LPF: <Top > Delay:0 .0m when using the DLYU NITS: m> BRIGHT: subwoofer with OPTIONS EVENT-26A CONTRAST:0 63Hz BACK OPTIONSM ENU RESETD EVICE 100Hz RESETD EVICE Arey ou sure? INFORMATION BACK OPTIONSM ENU RESETD EVICE 115A off: the background light is always on.
  • Page 24 Event Series | Recommendations of use Encendido / apagado A sound system should be switched on sequentially. Switch on the self-powered units last in your sound system (switch on the subwoofer before the mid-high system). Switch on the sound sources such as CD players or turntables, then the mixer, then the processors, and finally the self-powered unit.
  • Page 25 This equipment does not normally overheat during normal conditions of use. When overheating occurs, the FAN (EVENT-26A) will automatically start working reducing the temperature of the unit. Make sure that the rain protectors are properly separated from the amplifier´s back plate in order to not block the air flux thru the fan.
  • Page 26 Event Series | Troubleshooting Problem Cause Solution No sound from the unit. The DISPLAY does not light 1 - No power to the unit. 1 - Check all the connections and the power distro. 2 - Defective cable / connector. 2 - Check that the cable and connector are working properly.
  • Page 27 The goal is to allow the user to become familiar with the All flying accessories that are not supplied by DAS Audio are the user´s responsibility. Use mechanical elements required to fly the acoustic system, as well as the safety measures to at your own risk.
  • Page 28 Splay angles vary form 0º to 10º in steps of 1º. above it. The rigging system of the EVENT-26A employs a 3 point attaching system. Use two of the pins in the front left and right structures and the other two in the rear one.
  • Page 29 Event Series | Rigging system 4 or 6 units mounting on a PL-EV26S flatbed dolly Repeat the process shown in the previous Finally, the rigging bumper, AX-EV26 can be At his point the cover for 4 units could be placed figures with the rest of the cabinets.
  • Page 30 Event Series | Rigging system Array mounting of groups of 4 units on a flatbed dolly Groups of to 4 or 6 units are easy to transport by truck. We will see in this section the assembly position. (pin point of the central bar). of an array system with groups of four units previously placed on the PL-EV26S dollies.
  • Page 31 Event Series | Rigging system Rise the system and splay angles between cabient will be set automatically: NOTE: To rig the system the simplest approach is using three pins (two at the front and one at the rear). With this method the splay angle between units is set automatically while the cabinets are lifted up.
  • Page 32 Event Series | Rigging system 0º Repeat the process with the second dolly. Lower the first four units, set splay angle in the ones stacked on the dolly, attach the two groups and rise it. In the sample shown only three pins per cabinet are used: 1º...
  • Page 33 Event Series | Rigging system EVENT-115A Array mounting Fig. 12 Fig. 13 Fig. 14 Fig. 15 Event Series User's Manual...
  • Page 34 Event Series | Rigging system EVENT-26A Array mounting “one by one” Set splay Set splay Set splay Fig. 16 Fig. 17 Fig. 18 Fig. 19 Event Series User's Manual...
  • Page 35 EVENT-115A + EVENT-26A Array mounting First step will be assembling the subwoofers with the AX-EV26. follow the process shown on previous pages. Next step, before hanging the EVENT-26A units is to fix to the bottom EVENT-115A the joining plate JP-EV26. JP-EV26 Fig.
  • Page 36 Event Series | Rigging system Set splay Fig. 23 Fig. 24 Event Series User's Manual...
  • Page 37 Event Series | Rigging system Stacking EVENT-26A on EVENT-115A JP-EV26 joining plate is needed to stack the systems. Fig. 26 Set splay Fig. 27 Fig. 25 Event Series User's Manual...
  • Page 38 Event Series | Rigging system Angle between first EVENT-26A and EVENT-115A: Cam link Hole - real splay angle 9º= +4º 8º= +4º 7º= +2º 6º= +2º In this case splay angle = -3º 5º= 0º 4º= 0º 3º= -2º 2º= -2º...
  • Page 39 Event Series | Rigging system Stacking EVENT-26A on AXS-EV26 When using the AXS-EV26 to stack the system on After first step, fix the EVENT-26A to the AXS-EV26: a tripod TRD-2 or TRD-7 pole mount and AXC-ZT accessoty is also needed.
  • Page 40 Event Series | Transport As a compact system, 8 tops and 4 subs can be transported in a small van: Note: EVENT-208A/210A/218A/121A EVENT-26A and Euro truck EVENT-115A (EV-26A & EV-115A in the images) 2x EV-115A 4x EV-26A 4x EV-26A 2x EV-115A...
  • Page 41 Event Series | Annex Line connections: unbalanced and balanced There are two basic ways to transport an audio signal with microphone or line level: Balanced XLR (Cannon) to Balanced XLR Unbalanced line: Utilising a two conductor cable, it transports the signal as the voltage between them.
  • Page 43 DAS Audio Group, S.L. DAS Audio of America, Inc. DAS Audio Asia PTE. LTD. C/ Islas Baleares, 24 6900 NW 52nd Street Miami, FL 9 Gray Lane 03-01 46988. Fuente del Jarro 33166 – U.S.A Signature Crest Valencia - Spanien Tel.
  • Page 44 www.dasaudio.com Event Series User's Manual...