Advertisement

Quick Links

MODELS:
IQ
50C
IQ
90C
IQ 180C
IQ
IQ
IQ
READ
THIS
MANUAL
MAINTENANCE SECTIONS. THE INSTALLATION OF THIS APPLIANCE MUST BE CARRIED
OUT BY THE TECHNICAL ASSISTANCE SERVICE.
TECHNICAL MANUAL
IQ R290 RANGE
230
450
650
CAREFULLY,
ESPECIALLY
THE
INSTALLATION
AND

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IQ 650 and is the answer not in the manual?

Questions and answers

Summarization of Contents

Introduction
1.1. Warnings
Safety guidelines for installation and operation of the ice machine.
1.2. Machine Reception
Procedures for inspecting and receiving the machine upon delivery.
Installation
2.1. Ice Machine Location
Guidelines for choosing the optimal placement of the ice machine.
2.2. Ice Machine Leveling
Steps to ensure the ice maker is perfectly level for operation.
2.4. Minimum Distance to Obstacles
Recommended clearances for proper machine ventilation and service.
2.5. Water Supply Connection
Instructions for connecting the machine to the water supply.
2.6. Drain Connection
Guidelines for properly connecting the drain hose.
2.7. Electric Connection
Safety and procedural steps for electrical hookup.
Prior Control and Start-Up
3.1. Prior Check
Essential checks before operating the machine.
Assembly of the Dispersion Cone
Guide for installing the ice distribution component.
3.3. Start Up
Step-by-step process for initially powering on the ice machine.
Description of Components
4.1 Refrigeration Equipment
Details of the machine's cooling system components.
4.2 Hydraulic Equipment
Explanation of the water circulation system parts.
4.3 Electrical Equipment
Overview of the machine's electrical system components.
7- Alarms
7.1 Magneto-Thermal Protector or Circuit Breaker
Protection against motor overload and current peaks.
7.2 Thermal Protector of the Geared Motor
Monitors motor stator temperature to prevent overheating.
7.3 Water Level
Detects low water levels and stops the machine.
7.4 Stop Due to Ice Filling
Halts operation when ice accumulates excessively.
Maintenance and Cleaning Procedures
8.1 Cleaning of Air Condenser
Steps to clean the air-cooled condenser.
8.2 Cleaning of Water Condenser
Procedure for cleaning the water-cooled condenser.
8.3 Change of Water Filter
Instructions for replacing the water filter cartridge.
8.4 Cleaning the Hydraulic Circuit
Process for flushing and cleaning the water system.

Table of Contents