Advertisement

Quick Links

For the models Libelle, Tirol, SuperT, Venice, Milan, Berlin and CrossX with LCD display
FAQ: How to switch the lights on? Push and hold the + button on the display!
Important: To provide the best experience this manual is continuously updated. To make sure that you are referring to the 
most up to date information download the latest version at leitner.com.au/manual
About this manual
• Thank you for purchasing a Leitner electric bike. We take
pride in providing electric bikes at outstanding value,
delivered to you factory direct. Riding an ebike can be
fun, however for safety reasons it is important to only
ride the bike after reading and understanding the
complete manual.
• The following manual is only a basic guide to assist you
and is not a complete or comprehensive manual of all
aspects of assembling, maintaining, repairing and using
your bicycle. In the interest of safety we recommend that
you visit a local electric bike professional to assemble,
tune and regularly service the bike.
• This manual makes no representation about the safe use
of this bike under all conditions. It is impossible to
predict all situations when riding a bike and there are
risks associated with riding this bike which cannot be
avoided. These risks are at the sole responsibility of the
rider.
• This assembly and operation manual shall remain an
integral part of the electric bicycle. When you transfer
the electric bicycle to others, please enclose
manual as it contains important safety guidance and
operation instructions. Anyone riding the electric bike
shall carefully read the safety guidance and operation
instructions before your first ride.
Meaning of Safety Language.
Riding a bike can cause injury and in extreme cases death,
therefore it is important to read and understand the manual
before using the bike. The most common cause of injury is
falling off the bicycle and reading the manual will help to
avoid situations which put you at risk of injury or death.
• WARNING! Indicates the possibility of injury or death.
• Caution! Indicates the possibility of injury.
As there are different models of eBikes, pictures are for
reference only and may show a similar component from
another model. Certain instructions of this manual may not
apply to your model. All content in this manual is subject to
change or withdrawal without notice. We made effort to
provide accurate information, however we do not assume
responsibility of liability if any errors or inaccuracies appear.
If you are unsure about certain parts of this manual, if you
have a problem or need repair, please visit the website
www.Leitner.com.au
representative at sales@Leitner.com.au with a problem
description and pictures and videos or call 1300 856 725.
Powering Your Freedom
ELECTRIC BICYCLE USER MANUAL
and
email
a
customer
Table of contents:
About this manual..............................................1
Guide to safe operation.................................2-3
Checklist before each ride.................................3
Safeguarding guidelines.....................................4
Maintenance schedule.......................................4
Before your first ride..........................................5
Operation of your electric bike.........................6
Turning on the lights...........................................6
Getting started....................................................7
Assembly and adjustment of...
• Quick release levers......................................8
• Front wheel....................................................8
• Handle-bar and Stem....................................9
• Folding handle-stem (SuperT)  ...................9
• Non-Folding handle-stem............................11
• Bell..................................................................11
• Pedals.............................................................12
• Crank arm, Bottom Bracket....................... 12
• Rear Rack...................................................... 12
this
• Seat and seatpost........................................13
• Headset.........................................................13
• Bike stand......................................................13
• Chain..............................................................13
• Disc brakes....................................................14
• Rim brakes....................................................15
• Brake levers..................................................15
• Brake and gear Cables................................15
• Gears..............................................................16
• Reflectors.......................................................17
• Rear wheel....................................................18
• Rim, Tyres and Tubes...................................19
• Frame and Fork (Frameset)........................19
• Suspension ...................................................19
• Accessories....................................................22
Battery and charger.........................................20
Lubrication.........................................................22
Warranty............................................................22
List of torque recommendations....................22
Conversion table psi/kPa.................................22
Basic trouble-shooting.....................................23
Controller ..........................................................24
Controller Wiring Diagram...............................25
© Leitner Pty Ltd 2020
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Venice and is the answer not in the manual?

Questions and answers

Summarization of Contents

Guide to Safe Operation
Mechanical and Electrical Safety
Describes safety of maintenance and electrical work on the ebike.
Riding in Different Conditions
Advises on riding in various environments and highlights bike limitations.
Riding Instructions
Provides specific advice for safe riding practices and awareness.
Checklist Before Each Ride
Pre-Ride Safety Checks
Covers battery, frame, wheels, brakes, and other critical components.
Maintenance
Tools for Maintenance
Lists essential tools required for performing bike maintenance.
Best Practice Maintenance
Recommends professional assembly, adjustment, and servicing.
Maintenance Schedule
Regular Maintenance Intervals
Details weekly, monthly, quarterly, and annual checks for upkeep.
Before Your First Ride
Initial Setup and Comfort Adjustments
Guides on adjusting seat and handlebar height for optimal comfort.
Rules to Ride Safely
Outlines essential safety rules for riding and legal compliance.
Operation of Your Electric Bike
Throttle and Pedal Assist Systems
Explains the two primary methods for activating the motor.
LCD Display Panel Functions
Details the display features, controls, and settings for operation.
Getting Started
Assembly Instructions
General guidance for unpacking and assembling bike components.
Quick Release Levers
Operating Quick Release Levers
Instructions for safely using quick release mechanisms for wheels.
Handlebar and Stem Assembly
SuperT Handle-Stem Folding
Instructions for folding the handle-stem on SuperT models.
Seat and Seat Post Adjustment
Recommended Seat Position
Guidance on setting optimal seat height and position for safety.
Disc Brakes
Disc Brake Break-in Period
Information on new disc brake performance and initial adjustments.
Adjusting Disc Brake Clearance
Steps for adjusting brake pad to disc distance for optimal braking.
Aligning Brake with Disc
Process for centering brake pads correctly with the disc.
Changing Brake Pads
Procedure for replacing worn brake pads on disc brakes.
Rim Brakes
Rim Brake Operation and Inspection
How rim brakes work and checks for wear and tear.
Adjusting Rim Brake Pads
Steps to adjust pad distance and centering for proper function.
Releasing Rim Brakes
Procedure to release rim brakes for wheel removal.
Changing Gears Correctly
Gear Shifter Controls
Explanation of how to use the gear shifter and its two controls.
Tuning the Rear Derailleur
Basic Gear Adjustment
Using the barrel adjuster for smooth gear shifting.
Advanced Derailleur Tuning
Adjusting limit screws and cable tension for optimal performance.
Frame Folding Mechanism
Straightening the Frame
Steps to unfold the bicycle frame safely.
Rear Wheel Installation
Removing the Rear Wheel
Step-by-step instructions for rear wheel removal.
Reinstalling the Rear Wheel
Guide for correctly installing the rear wheel and motor connection.
Tyres, Tubes, and Rims
Wheel and Rim Maintenance
Care for rims, spokes, and wheel bearings.
Tyre and Tube Replacement
Procedures for changing tires and tubes.
Battery Installation and Key Usage
Battery Lock Functions
Explains battery lock positions, installation, and removal.
Battery Charging Procedure
Safe steps for charging the battery, including temperature and timing.
Battery Care and Storage
Battery Range Factors
Discusses factors affecting and estimating battery range.
Unlocking Throttle for Higher Speed
The Controller Overview
Explains the role and function of the e-bike controller.
Throttle Unlock Procedure
Step-by-step guide to unlock the throttle for increased speed.

Table of Contents