ICO IJ1130 Installation Manual

Led medicine cabinets

Advertisement

Caution
Installation requires two people.
To reduce the risk of burns, fire, electric shock or injury to persons. Use this furnishing
Warning
only for its intended use as described in these instructions. Do not use attachments not
recommended by the manufacturer. Never drop or insert any object into any opening. Do
not use outdoors.
GROUNDING INSTRUCTIONS
Danger
Risk of electric shock. Connect this furnishing to a properly grounded circuit only.
This product must be connected to a grounded metal, permanent wiring system, or an
equipment-grounding conductor must be run with the circuit conductors and connected to
the equipment-grounding terminal or lead on the product.
For an electrical hardwire option, the LED mirror must be wired to a 20 Amp GFl (Ground
Fault Interrupter) protected circuit when used in bathrooms and all other locations as per
your respective local Electrical Code.
IMPORTANT SAFETY INSTRUCTIONS
INSTALLATION GUIDE
LED Medicine Cabinets
Getting Started
Before installation, check the product for any shipping
damages. If you find damages, do not install and
contact your dealer or ICO.
Electrical Connections
All wiring should be done by a qualified
licensed electrician
Read and follow all instructions
Caution
before installing this LED mirror.
Shut off power before wiring the
Danger
mirror.
Requires 120VAC 20 Amp GFI
Warning
protected circuit.
cs@icobath.com | www.icobath.com
877 757 8930

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IJ1130 and is the answer not in the manual?

Questions and answers

Summary of Contents for ICO IJ1130

  • Page 1 LED Medicine Cabinets Getting Started Before installation, check the product for any shipping damages. If you find damages, do not install and contact your dealer or ICO. Electrical Connections All wiring should be done by a qualified licensed electrician Read and follow all instructions Caution before installing this LED mirror.
  • Page 2: Required Tools And Materials

    *Accessories and parts may vary from the picture above.Depends on the product model and size.* Dimensions Make sure to measure and determine overall mirror dimensions before installation. Model # Rough-in Size (width) (height) (depth) IJ1124 24” 36” 4-5/8” 23-1/4” x 35-1/4” x 3-3/4” IJ1130 30” 36”...
  • Page 3 INSTALLATION GUIDE LED Medicine Cabinets JUNCTION BOX PLACEMENT for Recessed Mount for Surface Mount (electrical wiring or plugin behind the cabinet) (plugin location at the top of the cabinet) Recommended location of the electrical outlet Recommended location of the electrical outlet or junction box - 28”...
  • Page 4: Recessed Installation

    INSTALLATION GUIDE LED Medicine Cabinets RECESSED INSTALLATION Refer to dimensions on page 2 to measure Cut out the hole as per marked dimensions. rough-in size. NOTE: For a recessed mount, the wall cavity must be framed and the cabinet must be secured to framing studs. Reroute electrical or water supply lines from the cavity.
  • Page 5 INSTALLATION GUIDE LED Medicine Cabinets RECESSED INSTALLATION For hardwire: first cut off the power plug , then For hardwire: connect electrical wires and then use the WIRE CONNECTOR to connect to external place the cabinet between the wall studs. power supply. For plugin: plug into the electrical outlet.
  • Page 6: Surface-Mounted Installation

    INSTALLATION GUIDE LED Medicine Cabinets SURFACE-MOUNTED INSTALLATION Measure mirror dimensions and mark the Drill holes in the mark. Put the wall anchors. cabinet’s location on the wall. Attach the bottom mounting bracket to the wall with screws. Mark the position of the bottom mounting Rest the cabinet on the mounting bracket and bracket.
  • Page 7 INSTALLATION GUIDE LED Medicine Cabinets SURFACE-MOUNTED INSTALLATION Insert the top mounting bracket into the top of Adjust the position of top mounting bracket the cabinet. and mark holes with a pencil. Make sure top brackets are locked in the Remove the cabinet and drill holes on the grooves.
  • Page 8 INSTALLATION GUIDE LED Medicine Cabinets SURFACE-MOUNTED INSTALLATION Insert the cabinet on the bottom mounting Install the side mirrors. bracket again and hold in place, then attach the top mounting bracket to the top of cabinet. Attach the top mounting brackets to the holes with screws.
  • Page 9: Glass Shelf Installation

    INSTALLATION GUIDE LED Medicine Cabinets GLASS SHELF INSTALLATION Insert clear snap in shelf clips into Insert the glass shelf along the Make sure to tighten the plastic holes on the sides of the cabinet. board clip slot. screw at the bottom of the shelf support to prevent the shelves from becoming loose.
  • Page 10 INSTALLATION GUIDE LED Medicine Cabinets OPTIONAL DOOR ADJUSTMENT Doors may need to be adjusted after the initial shipping of the cabinet. The cabinet doors have a three-way adjustment feature: height, side to side, level and depth. - With the hinge fully extended you can access the front and back screws.

Table of Contents