ICO Camden IC1030 Installation Manual

To reduce the risk of burns, fire, electric shock or injury to persons. Use this furnishing
Warning
only for its intended use as described in these instructions. Do not use attachments not
recommended by the manufacturer. Never drop or insert any object into any opening. Do
not use outdoors.
GROUNDING INSTRUCTIONS
Danger
Risk of electric shock. Connect this furnishing to a properly grounded circuit only.
This product must be connected to a grounded metal, permanent wiring system, or an
equipment-grounding conductor must be run with the circuit conductors and connected to
the equipment-grounding terminal or lead on the product.
For an electrical hardwire option, the LED mirror must be wired to a 20 Amp GFl (Ground
Fault Interrupter) protected circuit when used in bathrooms and all other locations as per
your respective local Electrical Code.
IMPORTANT SAFETY INSTRUCTIONS
INSTALLATION GUIDE
Getting Started
Before installation, check the product for any shipping
damages. If you find damages, do not install and
contact your dealer or ICO.
Electrical Connections
All wiring should be done by a qualified
licensed electrician
Read and follow all instructions
Caution
before installing this LED mirror.
Shut off power before wiring the
Danger
mirror.
Requires 120VAC 20 Amp GFI
Warning
protected circuit.
cs@icobath.com | www.icobath.com
Camden LED Mirrors
877 757 8930