Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Siemens iQ300 SN66D010GC
Summarization of Contents
Safety Instructions
Before You Switch On
Read instructions and download from website for installation, use, and maintenance.
Delivery Safety
Check packaging for damage, dispose responsibly, and keep children away.
Installation Safety
Ensure safe installation, proper power connection, and appliance security.
Safety Instructions
Appliance Placement
Avoid heat sources, check power cord insulation, install built-under appliances securely.
Daily Use Precautions
Read safety info for cleaning/rinsing agents, observe packaging instructions.
Safety Instructions
Childproof Lock and Damage Handling
Information on child lock, handling appliance damage, and repairs.
Disposal and Critical Warnings
Steps for disposal and warnings about injury risk and explosion risk.
Safety Instructions
Specific Hazard Warnings
Warnings regarding scalding from hot water spray and risks to children.
Protection of the Environment
Packaging Waste Management
Identifies plastic parts with abbreviations for sorting waste during disposal.
Old Appliances Disposal
Refers to disposal safety instructions and EU directive for WEEE.
Getting to Know Your Appliance
Control Panel Overview
Lists and describes the buttons and displays on the appliance's control panel.
Water Softening System/Special Salt
Appliance Interior Identification
Identifies numbered parts of the appliance interior, including baskets and dispensers.
Water Softening System Function
Explains the need for soft water and how special salt softens it.
Water Softening System/Special Salt
Setting Salt Dispenser Levels
Guides on determining water hardness and setting salt dispenser levels (0-3).
Water Hardness Table Reference
Provides a table correlating water hardness (Clarke, mmol/l) with setting levels (0-3).
Water Softening System/Special Salt
Using Special Salt
Instructions for refilling the salt tank and when to add salt.
Combination Detergents with Salt
Advice on using combined detergents and when special salt is still needed.
Switching Off Salt Refill Indicator
Steps to switch off the salt refill indicator when using specific detergents.
Rinse Aid
Setting Rinse Aid Amount
Guides on refilling the rinse aid dispenser and setting the amount.
Rinse Aid Refill Indicator
Explains when the indicator lights up and how to refill the rinse aid.
Utensils
Not Suitable Utensils
Lists types of utensils that are not dishwasher-safe.
Glass and Utensil Damage Prevention
Explains causes of damage and provides recommendations for preventing it.
Utensils
Loading the Dishwasher
Instructions on how to securely place utensils to ensure effective cleaning.
Unloading the Dishwasher
Advice on unloading from bottom up and handling hot utensils.
Cups and Glasses Loading
Specific guidance for loading cups and glasses in the top basket.
Utensils
Loading Pans
Guidance on placing heavily soiled pans in the bottom basket for better results.
Cutlery Basket Loading
Instructions for arranging cutlery in the basket for optimal cleaning and safety.
Etagere Usage
Explains how to use the etagere for small items and how to fold it.
Utensils
Adjusting Basket Height
Instructions on adjusting the top basket height for tall items.
Utensil Arrangement Features
Covers folding spikes, knife shelf, and small accessories holder for better loading.
Detergent
Top Basket Adjustment Mechanisms
Explains two methods for adjusting the top basket height: side levers and roller pairs.
Detergent Types and Usage
Information on using tablets, powder, or liquid detergents and their properties.
Detergent
Adding Detergent
Step-by-step guide on how to open the dispenser and add detergent.
Detergent
Combination Detergents
Explains 3-in-1, 4-in-1 detergents and their limitations with water hardness.
Handling Detergent Tablets Safely
Warnings about placing small parts in the tablet tray and using it as a handle.
Overview of Programmes
Programme Selection Guide
Illustrates programmes based on utensil type and soiling, with options and sequence.
Additional Options
Programme Selection
Guidance on choosing programmes based on utensils and soiling.
Intensive Zone and HygienePlus
Combines Intensive Zone for heavy soiling and HygienePlus for disinfection.
Load and Drying Options
Covers Half Load for fewer items and Extra Drying for better results.
Operating the Appliance
Programme Data
Information on consumption values and factors affecting them.
Aqua Sensor Function
Explains the Aqua Sensor's function in measuring water turbidity for efficiency.
Switching On the Appliance
Step-by-step guide to turning on the appliance and starting a programme.
Operating the Appliance
Optical Display While Running
Describes the light spot indicating programme status and its visibility.
Timer Programming
How to delay the start of a programme by 3, 6, or 9 hours.
End of Programme Notification
How the end of a programme is indicated and how to adjust buzzer volume.
Operating the Appliance
Interrupting and Terminating Programme
Steps to pause, reset, and terminate a running programme.
Changing the Programme
Explains that programmes can only be changed via a reset.
Intensive Drying Function
Details the Intensive Drying function for improved results and potential time increase.
Cleaning and Maintenance
Overall Condition Checks
Guidance on checking spray arms, cleaning with detergents, and door seals.
Health Hazard Warning
Warning against using domestic detergents containing chlorine.
Salt and Rinse Aid Refills
Reminder to check and refill salt and rinse aid indicators.
Cleaning and Maintenance
Filters Maintenance
Instructions for cleaning the coarse, fine, and microfilters.
Spray Arms Cleaning
Steps to check and clean spray arms for blockages.
Fault, What To Do?
General Fault Rectification
General advice on self-rectifying faults and using the reset function.
Repair Safety Warning
Warning that repairs should only be done by technicians with original parts.
Waste Water Pump Clearing
Instructions for clearing blockages in the waste water pump.
Fault, What To Do?
"Check Water Supply" Faults
Troubleshooting for "Check water supply" indicator, including hose kinks and filters.
Refill Indicator Faults
Explains issues with salt refill indicators and potential technical faults.
Fault, What To Do?
Display Flashing / Door Issues
Remedies for flashing displays, door not closing, and child lock activation.
Utensils Not Dry Troubleshooting
Causes and solutions for utensils remaining wet after the cycle.
Fault, What To Do?
Cutlery and Interior Wetness Issues
Troubleshooting for wet cutlery and appliance interior due to drying principles.
Food Debris and Blockage Troubleshooting
Addresses food remnants, filter issues, spray arm blockages, and programme settings.
Receptacle Rinsing and Basket Height
Solutions for inadequate rinsing of tall receptacles and incorrect top basket height.
Fault, What To Do?
Detergent Residue Issues
How to fix detergent dispenser blockages and residue problems.
Plastic Parts and Coatings Troubleshooting
Explains water stains on plastic and coatings, and salt dispenser issues.
Fault, What To Do?
Stubborn Coatings and Limescale
Solutions for stubborn coatings, limescale, and ineffective detergents.
Tea/Lipstick Residue and Colourful Deposits
Addresses tea/lipstick stains and removable colourful deposits.
Plastic Discolouration (Normal)
Notes that plastic discolouration is normal and does not affect function.
Fault, What To Do?
Plastic Discolouration and Rinse Aid Issues
Addresses plastic discolouration, rinse aid streaks, and detergent residue.
Glass Clouding and Rust Spots
Solutions for clouding of glass and rust spots on cutlery.
Fault, What To Do?
Appliance Start and Door Issues
Troubleshoots appliance not starting, auto-programme start, and door difficulties.
Noise Issues Troubleshooting
Explains causes of striking noises from valves and knocking/rattling noises.
Fault, What To Do?
Unusual Foam Formation
Addresses unusual foam formation due to handwash liquid or spilled rinse aid.
Customer Service
Contacting Customer Service
Information on when and how to contact customer service, providing appliance numbers.
Installation and Connection Overview
Lists the sequence of steps for correct installation and connection.
Product Package Contents
Lists items included in the product package.
Installation and Connection
Technical Specifications
Lists weight, voltage, load, fuse, power input, water pressure, inlet rate, temperature, and capacity.
Installation Requirements
Details installation dimensions, leveling, and securing built-under appliances.
Waste-Water Connection
Instructions for connecting the waste-water hose to the siphon.
Installation and Connection
Drinking Water Connection
Guidance on connecting the water supply hose, pressure, and temperature.
Electrical Connection
Requirements for connecting to power, socket accessibility, and safety symbols.
Installation and Connection
Removing the Appliance
Steps for disconnecting power, water, and physically removing the appliance.
Transportation Preparation
Instructions for securing loose parts and draining the appliance for transport.
Protection Against Frost
How to empty the appliance to prevent damage from frost.
Childproof Lock (door lock)
Activating/Deactivating Child Lock
Illustrates steps to activate, use with activated lock, and deactivate the childproof lock.
Baking Sheet Spray Head
Using the Baking Sheet Spray Head
Instructions for using the spray head to clean large items like baking sheets.
AQUA-STOP Guarantee
Guarantee Conditions
Details the conditions under which the Aqua-Stop guarantee covers water damage.
Contact Information and Website
Provides phone numbers for service and the official website address.
Need help?
Do you have a question about the iQ300 SN66D010GC and is the answer not in the manual?
Questions and answers