Software Specifications - TYAN THUNDER K8QE Manual

Table of Contents

Advertisement

Intelligent Platform Management
Interface Header
Tyan Server Management Daughter card
(Optional) support via IPMI header
Renesas Baseboard Management
Controller (BMC) tailored for IPMI 2.0 Spec
Supports KCS and BT styles
Flexible Windows or Linux Management
Solution
Supports RMCP and SNMP protocols
Supports ASF standard and EMP
I2C serial multi-master controllers and
UARTs
Built-in IPMB connector
Remote power on/off and reset support
(IPMI-over- LAN)
Hyper Transport™ Connectors
Two PCI Express x16 slots with TYAN
private signal definition which uses the
Hyper Transport to connect two HT cards
to the M4881. (CPU Board specifically
designed by TYAN).
*Not validated at the time of print, subject
to change.

Software Specifications

OS (Operating System) Support:
Microsoft Windows 2003 Enterprise Server(32/64-bit)
Microsoft Windows 2003 Server (32/64 bit)
RHEL 4 Update 1 64-bit
SuSE Enterprise 9.0 SP2 64bit
SuSE 10.0 64-bit
Other distributions of Linux pending validation
TYAN reserves the right to add support or discontinue support for any OS with or
without notice.
Integrated LAN Controllers
Two Marvell® 88E1111 GbE PHY
• Each one has RJ-45 LAN connector with
LEDs
• Each one has front panel LED header
One Intel 82541 GbE LAN controller
• RJ-45 LAN connector with LED
BIOS
PhoenixBIOS® on 8Mbit LPC Flash ROM
ACPI 2.0
Serial Console Redirect
USB device boot
48-bit LBA Support
Power management:S0, S1, S4 and S5
Form Factor
SSI MEB Footprint (13"x16")
EPS12V/SSI v3.5(24 + 8 + 8) power
connectors
Serial (one) connectors and one VGA port
Stacked USB 2.0 connectors
Stacked PS/2 keyboard and mouse
connectors
Three RJ-45 LAN connector with LEDs
Power Supply
EPS12V Power Supply
6
http://www.TYAN.com

Advertisement

Table of Contents
loading

This manual is also suitable for:

Thunder k8qe s4885g2nrS4885g2nr

Table of Contents