Advertisement
Quick Links
JUNO
TEMA
CIRCULAR SIZING SAW
SCIE CIRCULAIRE
F
GB
WITH SLIDING TABLE
EQUARISSEUSE
OPERATION MANUAL
MANUEL OPERATIONNEL
SEGA CIRCOLARE
I
SQUADRATRICE
MANUALE OPERATIVO
SIERRA CIRCULAR
FORMATKREISSÄGE
ESCUADRADORA
E
D
BETRIEBSANLEITUNG
MANUAL OPERATIVO
ÖÈÐÊÓËßÐÍÀß ÏÈËÀ
ÔÎÐÌÀÒÍÎ-
RUS
ÐÀÑÊÐÎÅ×ÍÛÉ ÑÒÀÍÎÊ
ÈÍÑÒÐÓÊÖÈÈ ÏÎ
ÝÊÑÏËÓÀÒÀÖÈÈ
CODE : 85220000
REV. 06 DATE 30-06-2005
Advertisement
Related Manuals for LAZZARI TEMA 3200
Summarization of Contents
GENERAL INFORMATION
MANUFACTURER
Identifies the company that manufactured the machine.
MACHINE INSTALLATION ADJUSTMENT AND OPERATION
TRANSPORT
Details the safe procedures for moving the machine using a forklift.
LEVELLING AND FASTENING
Guides on ensuring the machine is level and securely anchored to the floor.
MAINTENANCE
BELT TENSIONING
Describes how to check and adjust belt tension for optimal saw spindle operation.
FUNCTIONAL MACHINE PARTS
Sliding carriage
Part 6: The main moving component that supports the workpiece during cutting.
Control panel
Part 7: The interface for operating and controlling the machine's functions.
Cutter blade adjustment knobs
Part 12: Knobs used for precise adjustment of the scorer blade.
GENERAL INFORMATION
MACHINE DESCRIPTION
Provides a general overview of the machine's components and purpose.
SAFE WORK PRACTICES
USING THE PIECE PUSHERS AND THE PUSH BOARDS
Instructions on the correct use of safety devices for feeding material.
SELECTING THE BLADE AND THE DIVIDING CUTTER
Guidance on choosing appropriate saw blades and dividing cutters for safe operation.
NOISE LEVELS
A. NOISE LEVEL ACCORDING TO STANDARD EN ISO 3744
Specifies noise pressure levels measured according to EN ISO 3744 standard.
INSTALLATION OF MACHINE
TRANSPORT
Details the safe procedures for moving the machine using a forklift.
PLACEMENT
LEVELLING AND FASTENING
Guides on ensuring the machine is level and securely anchored to the floor.
FITTING AND ADJUSTMENT OF SCORER BLADE
A. The scorer blade is too low and does not score
Scorer blade position too low, resulting in splintered lower panel.
B. The scorer blade is too high
Scorer blade position too high, causing chamfered edges without splinters.
C. The scorer blade is moved too far to the side
Scorer blade displaced laterally, causing a step and splinters.
D. The scorer blade is correctly positioned
Indicates the correct positioning of the scorer blade for optimal cutting.
MAGNETIC MEASURING SYSTEM M10 OPERATING MANUAL
DESCRIPTION OF KEYBOARD AND DISPLAY
Details the layout and function of the M10 display's keyboard and screen.
PROGRAMMING MENU
ORIGIN - origin programming
Function for setting the zero point or origin for measurements.
SETUP - calibration
Procedure for calibrating the display unit for accurate measurements.
SETUP
SYSTEMDIAGNOSE IN ECHTZEIT
Monitors the system's operational status in real-time, indicating errors or faults.
WARNING
NO TAPE
Error message indicating the magnetic strip is not detected by the sensor.
SENSOR DISCONNECTED
Error message indicating the sensor is not properly connected or is faulty.
CALCULATOR fx-7459G (TILTING FRAME)
AVAILABLE FUNCTION KEYS
Lists the primary function keys available on the calculator.
STROKE POSITIONING PROGRAMME USE
Explains how to use the calculator's program for positioning the cutting stroke.
DISPLAY VPE.1 (Blade Tilting)
INSTALLATION MANUAL
Provides instructions for installing the VPE.1 display unit.
TECHNICAL FEATURES
Details the technical specifications and capabilities of the VPE.1 display.
DIP SWITCH
DISPLAY INSTALLATION
Guides the user through the process of installing and configuring the display unit.
MAINTENANCE
BELT TENSIONING
Describes how to check and adjust belt tension for optimal saw spindle operation.
Need help?
Do you have a question about the TEMA 3200 and is the answer not in the manual?
Questions and answers