TYAN THUNDER H2000M Manual page 73

3.9.1.1 – Memory Configuration Sub-Menu
This menu has options for memory speed & latency. Use the up and down
arrow (á/â) keys to select an item. Use the Plus and Minus (+/-) keys to
change the value of the selected option.
Main Advanced
Memory Configuration
Memclock Mode
MCT Timing Mode
Bank Interleaving
MemClk Tristate C3/ATLVID
Memory Hole Remapping
Feature
Memory Configuration
Memclock Mode
MCT Timing Mode
Bank Interleaving
MemClk Tristate
C3/ATLVID
Memory Hole Remapping
BIOS Setup Utility
PCI/PnP Boot
[Auto]
[Auto]
[Auto]
[Disabled]
[Enabled]
Option
Select the DRAM Frequency
Limit
programming method. If Auto, the
DRAM speed will be based on
Auto SPDs. If Limit, the DRAM speed will
not exceed the specified value. If
Manual, the DRAM speed specified
Manual
will be programmed by users.
Allows user to configure the MCT
Manual
Timing Mode manually.
Auto
Disabled Enable Bank Memory Interleaving
Auto
Enable/Disable MemClk Tri-Stating
Disabled
during C3 and Alt VID
Enabled
Enable Memory Remapping around
Enabled
Memory Hole
Disabled
73
http://www.tyan.com
Security Chipset
MEMCLK can be set by
the code using AUTO, or
if you use LIMIT, you can
set one of the standard
values.
? ? Select Screen
? ? Select Item
+/- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Description
Exit