Table of Contents
Advertisement
Quick Links
550-0727-000
S Series:
Smoke Alarm
C Series:
Carbon Monoxide (CO) Alarm
SC Series: Combination Smoke/Carbon Monoxide (CO) Alarm
H Series:
Heat Alarm
PRODUCT INFORMATION MANUAL AND INSTALLATION INSTRUCTIONS
Prior to installation and use, read and follow all instructions and warnings in this manual.
A
Keep this manual for the Owner's future reference. Do not discard or destroy.
Model Number (see back of unit):
Manufacture Date Code (see back of unit):
Date of Purchase:
PRODUCT SUPPORT
fireprotection.gentex.com | Phone: 616.392.7195 | Toll-free: 800.436.8391
Where Purchased:
Advertisement
Table of Contents
Related Manuals for Gentex H Series
Summarization of Contents
Fire Protection Plan
Install Smoke Alarms Properly
Instructions for correct installation of smoke alarms for optimal performance.
Prevent Hazardous Situations
Safety rules and practices to prevent fire hazards and ensure safety.
Develop Escape Plan
Guidance on creating and practicing a fire escape plan for occupants.
Bedroom Door Safety
Recommends closing bedroom doors at night for fire protection.
Carbon Monoxide Protection Plan
What to Do If There Is a Fire
Provides essential steps for occupants during a fire emergency.
How This Device Functions
General Information: Smoke Alarm
Explains how the smoke alarm detects smoke using optical sensors and temperature.
If the Alarm Signal Sounds
Steps to take when a smoke, heat, or CO alarm sounds, including emergency calls.
General Limitations of This Device
Device Power and Battery Limitations
Covers operational requirements for power and battery backup.
Occupant Awareness and Audibility Limits
Discusses limitations in awakening occupants and audibility of the alarm.
Device Lifespan and Reliability
Addresses the limited lifespan, potential failures, and non-foolproof nature of the device.
Device Installation
Mounting Outlet Box
Instructions on selecting and installing the appropriate electrical box for the device.
Wiring General
Guidelines for electrical wiring, including wire types and grounding.
Battery Installation
How to Tell If This Device Is Working Properly
Explains how to verify the device's operational status using indicators and tests.
Using the Silence Feature
Tandem Interconnect Silence Feature
Details how the silence feature behaves with interconnected devices for various events.
Checkout & Troubleshooting
Self Test Results and Indicators
Explains device indicators and results from self-testing procedures.
Power and Wiring Checks
Guides checks for AC power, battery, and wiring connections for proper operation.
Trouble Indicators and Replacement
Identifies trouble indicators and provides guidance on device replacement.
Maintenance
Weekly Testing
Instructions for performing regular weekly tests to ensure device functionality.
Keeping Device Working Properly
Advice on cleaning, battery replacement, and avoiding contaminants for optimal performance.
Placement of Device
CO Alarm Placement Guidelines
Specifies recommended locations for installing carbon monoxide alarms according to standards.
Smoke Alarm Placement Guidelines
Outlines required locations for smoke alarms in dwelling units based on standards.
What You Need to Know About CO
Finding the Source of CO After an Alarm
Discusses challenges in locating CO sources and Gentex's policy on investigations.
Need help?
Do you have a question about the H Series and is the answer not in the manual?
Questions and answers