Table of Contents
Advertisement
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2022 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
23a
Advertisement
Table of Contents
Related Manuals for Bauer 59583
Summarization of Contents
Manual and Initial Safety
Manual Usage Instructions
Keep manual for safety, assembly, operating, inspection, maintenance, and cleaning procedures.
Product Safety Warning
Read material before use; failure to do so can result in serious injury.
Important Safety Information
Warning Symbols and Definitions
Explains safety alert symbols DANGER, WARNING, CAUTION, and NOTICE, and their meanings.
General Tool Safety Warnings
Provides 8 essential safety rules for operating the tool safely.
Safety Precautions and Guidelines
Extension Cord Safety
Recommends minimum wire gauge for extension cords based on length and amperage.
Personal Safety and Tool Care
Covers proper apparel, safety glasses, securing work, tool maintenance, and preventing unintentional starting.
Electrical Safety and Grounding
Grounding Instructions for 3-Prong Plugs
Details proper grounding procedures to prevent electric shock.
Lathe Operation Safety
Lathe Specific Safety Warnings
Lists 19 crucial safety warnings for operating the wood lathe.
Vibration Safety Precautions
Advises on reducing risks associated with prolonged tool vibration exposure.
Specifications and Setup
Product Specifications
Lists key technical details like electrical rating, speeds, dimensions, and weight.
Initial Setup and Assembly
Covers pre-operation checks, safety steps, and mounting the tool and brackets.
Lathe Components and Controls
Component Identification Diagram
Illustrates and labels the various parts and controls of the wood lathe.
Operating the Lathe
Performing a Test Run
Guides through the initial startup procedure to ensure proper operation.
Tool Rest Adjustment
Explains how to adjust the tool rest for optimal positioning during use.
Workpiece Mounting and Tailstock
Faceplate and Spur Center Installation
Details how to install and remove the faceplate and spur center for workpiece mounting.
Tailstock Adjustment
Describes how to adjust the tailstock for workpiece support and alignment.
Live Center and Speed Adjustment
Live Center Setup and Removal
Provides instructions for installing and removing the live center.
Adjusting Lathe Speed
Explains how to change belt positions to set speed ranges and use the speed dial.
Operation Procedures and Setup
Workpiece and Work Area Setup
Guidelines for preparing a safe and suitable work area and workpiece.
General Lathe Operating Instructions
Covers pre-operation checks, workpiece installation, and safe turning practices.
Spindle Turning Techniques
Spindle Turning Operation
Details the process of spindle turning, including marking centers and mounting workpieces.
Spindle Turning Tips
Offers advice for safe and effective spindle turning.
Bowl Turning Procedures
Mounting Workpiece for Bowl Turning
Explains how to mount workpieces for bowl turning using a faceplate.
Bowl Shaping Procedures
Shaping the Inside of a Bowl
Step-by-step guide to hollowing out the interior of a bowl or plate.
Maintenance and Servicing
Cleaning and Lubrication
Instructions for routine cleaning, inspection, and lubrication of the lathe.
Belt Replacement Procedure
Details the steps for replacing the drive belt on the lathe.
Troubleshooting Guide
Common Lathe Problems and Solutions
Provides a table of common issues, their causes, and solutions for the wood lathe.
Parts and Assembly Information
Parts List
A comprehensive list of all parts with their descriptions and quantities.
Assembly Diagram
Exploded View of Lathe Components
Visual representation of how all parts assemble together.
Product Information
Serial Number and Parts Ordering
Space to record serial number and notes on ordering replacement parts.
Warranty Information
Limited 90 Day Warranty Details
Outlines the terms and conditions of the 90-day limited warranty.
Need help?
Do you have a question about the 59583 and is the answer not in the manual?
Questions and answers