Bauer 221531E-B Owner's Manual & Safety Instructions

Bauer 221531E-B Owner's Manual & Safety Instructions

14" x 20" evs wood midi-lathe

Advertisement

Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2022 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
23a

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 221531E-B and is the answer not in the manual?

Questions and answers

DAVID C GIBSON
May 24, 2025

My motor will not run forward. when i turn it on it clicks and the display shows 0 rpm and the motor does not turn. no other sounds from motor or control box. if i turn it off and put it in reverse, it works perfectly fine.

1 comments:
Mr. Anderson
May 26, 2025

If the Bauer motor clicks and shows 0 rpm when turned on in forward but works fine in reverse, possible issues include:

1. Directional Switch malfunction – The switch may not be properly setting the motor to forward mode.
2. Internal damage or wear – Components like carbon brushes or the switch may be faulty.
3. Loose or damaged wiring specific to the forward direction.
4. Spindle or belt issues – Forward rotation may be causing mechanical resistance or obstruction.

A technician should inspect the switch, wiring, and internal components.

This answer is automatically generated

Martin Benkarski
April 13, 2025

what are the mounting dimensions

1 comments:
Mr. Anderson
April 13, 2025

The mounting dimensions for Bauer part number 221531E-B are not provided in the given context.

This answer is automatically generated

TONY
March 4, 2025

what size screws hold the 2 tool holders on the ends of lathe

1 comments:
Mr. Anderson
May 14, 2025

The size of the screws used for the tool holders on the ends of the Bauer lathe with part number 221531E-B is not specified in the provided context.

This answer is automatically generated

Subscribe to Our Youtube Channel

This manual is also suitable for:

59583

Table of Contents

Save PDF