Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Deye SUN-50K-G04
Summarization of Contents
Introduction
Appearance Introduction
Details the visual aspects and components of the on-grid inverter.
Parts list
Lists all components included in the inverter package.
Product handling requirements
Provides guidelines for safely lifting and transporting the inverter.
Safety warnings and instructions
Safety signs
Explains safety symbols used in the manual for hazard identification.
Safety instructions
Details crucial safety instructions for operating the inverter.
Notes for using
Provides essential precautions and guidelines for safe inverter operation.
Operation Interface
Interface View
Illustrates the front panel display and its components.
Status Indicator
Explains the function of the LED status indicator lights on the inverter.
Buttons
Details the function of the four keys on the inverter's front panel.
LCD Display
Describes the information displayed on the inverter's LCD screen.
Product installation
Select installation location
Provides criteria for choosing an appropriate and safe installation site.
Inverter Installation
Details the requirements for vertically mounting the inverter.
Electrical Connection
PV Module Selection
Outlines parameters for selecting compatible PV modules.
DC input terminal connection
Explains how to connect the PV input connector to the inverter.
AC input terminal connection
Details the connection procedure for the AC input terminals.
The connection of the ground line
Explains the procedure for connecting the ground wire for safety.
Max. over current protection device
Recommends circuit breaker specifications for overcurrent protection.
Inverter monitoring connection
Describes the setup for wireless remote monitoring via Wi-Fi.
Installation of datalogger
Provides steps for installing the WiFi stick/datalogger.
Configuration of datalogger
Refers to datalogger setup instructions.
Startup and Shutdown
Start up the inverter
Details the step-by-step procedure for starting the inverter.
Inverter Shutdown
Outlines the procedure for safely shutting down the inverter.
Zero-export function via energy meter
Multiple strings and parallel connection meters
Describes connecting one meter to multiple inverters for zero export.
Use of zero-export function
Explains the steps to enable and configure the zero-export function.
Notes while using zero export function
Provides safety hints and recommendations for zero-export mode.
How to browse the load power of your PV grid-tie plant on monitoring platform?
Guides on viewing load power via the solarman monitoring platform.
General Operation
The initial interface
Describes information shown on the LCD during normal inverter operation.
Submenus in the Main Menu
Details the five submenus available in the inverter's main menu.
System param setting
Explains how to configure time, language, display, and factory reset.
Protect Param setting
Covers safety-related parameter settings, requiring engineer access.
Comm. param setting
Details communication parameter settings like address and baud rate.
Repair and Maintenance
High Temperature Hazard
Warns about high temperatures and provides cleaning instructions.
Safety Hint
Advises against using abrasive or corrosive materials for cleaning.
Error information and processing
Error code
Lists error codes, descriptions, and solutions for inverter faults.
Specification
PV String Input Data
Details specifications for the inverter's PV string input parameters.
AC Output Data
Provides specifications for the inverter's AC output parameters.
Efficiency
Lists the efficiency ratings for the inverter.
Equipment Protection
Details the various protection features implemented in the inverter.
EU Declaration of Conformity
EU Declaration of Conformity
States the inverter's compliance with relevant EU directives and standards.
Need help?
Do you have a question about the SUN-50K-G04 and is the answer not in the manual?
Questions and answers