Related Manuals for Sony Digital HDVS HDC-950
Summarization of Contents
Service Overview
Optional Fixtures
Lists optional parts and tools required for camera maintenance and setup.
Cleaning of Connector/Cable
Provides instructions and tools for cleaning optical connectors to ensure signal integrity.
Circuit Description
Explains the function and interconnections of various circuit boards within the camera system.
Description of CCD Block Number
Details the CCD block number format, indicating type and serial number for identification.
Notes on Flexible Card Wire
Offers precautions and instructions for disconnecting and connecting flexible card wires.
Positioning Adjustment for Installing the Filter Knobs (HDC-950/930, HKC-T950)
Guides on correctly aligning and installing filter knobs on the disk unit for proper operation.
Notes on Replacement of Circuit Board
Outlines essential notes and required adjustments when replacing circuit boards or their components.
Disassembly of HDCZ Connector
Step-by-step instructions for safely disassembling and unsoldering the HDCZ connector.
How to Supply a Power of +12 V
Details how to provide +12V power for microphone input on the AU-271 board.
Version-Up of ROM/AT-130 Board
Explains the procedure for upgrading the camera's ROM version using a memory stick.
Note on Replacement of Lithium Battery
Provides essential notes regarding the replacement of the lithium battery for the Real Time Clock (RTC).
Writing and Rewriting the PLD Internal Data (HKC-T950)
Describes the process for writing and rewriting Programmable Logic Device (PLD) internal data for the HKC-T950.
Replacing the Fuse
Details the critical procedure for replacing fuses, emphasizing safety and correct part usage.
Replacement of Main Parts (HDC-900/910)
Replacing the CCD Unit
Step-by-step guide for safely removing and installing the CCD unit in HDC-900/910 cameras.
Replacing the Filter Disk Unit
Instructions for removing and installing the filter disk unit and its associated ND/CC filters.
Replacing the Power Assembly
Procedures for safely removing and installing the camera's power assembly unit.
Replacing the Fan
Detailed steps for removing and replacing the internal cooling fan to maintain optimal temperature.
Replacing the CCU Connector
Guidance on how to carefully remove and replace the CCU connector, noting optical cable fragility.
Replacing the Boards
Covers the replacement of various circuit boards like SDI-49, RX-28, MB-883, and CN-2073.
Replacement of Main Parts (HDC-950/930, HKC-T950)
Replacing the CCD Unit
Instructions for replacing the CCD unit specifically for HDC-950/930 and HKC-T950 models.
Replacing the Filter Disk Unit
Step-by-step guide for filter disk unit replacement, including knob alignment and filter handling.
Replacing the AC/DC Converter Unit
Procedures for removing and installing the AC/DC converter unit, emphasizing safe handling.
Replacing the Fan
Detailed instructions for replacing the rear and front fans, including cushion replacement.
Replacing the Side Switches (SW-1014 Board)
Covers the process of removing and replacing side switches on the SW-1014 board.
Replacing the VF DISP Switches (SW-1016 Board)
Instructions for removing and replacing viewfinder display switches on the SW-1016 board.
Replacing the CCU Connector
Guidance on replacing the CCU connector, noting the fragility of optical cables.
Replacing the TRACKER Connector
Steps for removing and installing the TRACKER connector assembly.
Replacing the PROMPTER Connector
Instructions for removing and installing the PROMPTER connector.
Replacing the VF Connector
Procedures for removing and installing the viewfinder (VF) connector.
Replacing the TEST OUT Connector
Details on removing and installing the TEST OUT connector, with variations based on serial number.
Replacing the MIC Connector
Covers replacement of the front MIC connector and AUDIO IN connector.
Replacing the INCOM Connector
Instructions for removing and installing the INCOM connector assembly.
Replacing the Boards
Detailed procedures for replacing various boards like RX-28, SDI-49, CN-2018, CN-1964, MB-882.
Replacing the Components of HKC-T950
Covers replacement of specific components for the HKC-T950, including cable adaptor, handle, lens cable, and boards.
Replacement of CCD Unit Boards
CN-1961 Board
Instructions for removing and installing the CN-1961 board within the CCD unit.
RP-114 Board
Procedures for removing and installing the RP-114 board.
DR-412/492 Board
Steps for removing and installing the DR-412/492 board.
TG-214 Board
Instructions for removing and installing the TG-214 board.
CN-1947/2329 Board
Procedures for removing and installing the CN-1947/2329 board.
DU-69 Board
Steps for removing and installing the DU-69 board.
PA-239 Board
Instructions for removing and installing the PA-239 board, including post-replacement adjustment.
NR-69/73 Board
Procedures for removing and installing the NR-69/73 board.
SERVICE Menu
Setup Menu
Explains the setup menu structure and how to select and navigate its various options.
TOP Menu
Describes the TOP menu, which provides an overview of all available menu configurations.
SERVICE Menu
Details the adjustments and settings required for servicing, including RPN correction and pixel adjustments.
Manual RPN Correction
Provides a step-by-step guide for manually correcting Residual Point Noise (RPN).
Pre White Clip Level Adjustment (ROM Version 1.30 or Higher)
Outlines the procedure for adjusting the pre white clip level using specific equipment and charts.
Electrical Alignment
Preparations
Lists required equipment, fixtures, and precautions for performing electrical alignments.
Automatic Adjustment
Explains how to perform automatic adjustments using the MAINTENANCE menu and AUTO LEVEL.
PA-239 Board Adjustment
Details the procedures for PA balance and white balance adjustments on the PA-239 board.
VA-196 Board Adjustment
Covers RPN adjustment and VA gain adjustment procedures for the VA-196 board.
Video System Level Adjustment (When using the Setup Menu)
Explains adjustments like White Shading, H/V Ratio, and Detail Level using the setup menu.
Video System Level Adjustment (When using MSU)
Details adjustments like White Shading, H/V Ratio, and Detail Level using the MSU-700A.
Adjustment After Replacement of ND Filter
Describes the white balance correction required after replacing the ND filter or filter disk unit.
Filter Positioning Adjustment
Outlines the procedure for adjusting the click position of filters when replacing the CCD unit or filter drive board.
Need help?
Do you have a question about the Digital HDVS HDC-950 and is the answer not in the manual?
Questions and answers