Adobe GOLIVE CS2 User Manual page 539

In addition to defining attributes, a sample takes effect at a specific time and for a specific duration. For example, in
one text track, you can add three text samples, each of which contains three different phrases that appear in the movie
at three different times for different periods of time. You can also add samples in a filter track to use different effects
at different times.
Note: Although video and audio tracks can contain samples, GoLive doesn't currently let you create or edit video or audio
samples directly. To create or edit video or audio samples, use a video or audio editing application such as Adobe
Premiere Pro or Adobe Audition.
To edit a sample
Select a track.
1
2 If the samples below the track are not displayed, click the arrow to the left of the track name in the Timeline Editor
to expand the track.
3 Use the tools in the Timeline Editor to add new samples or edit existing samples.
Creates additional samples in the track content area. You also use this tool to create sprite
Create Sample tool
keyframes. Click the Create Sample tool, select a start point in the track content area, and then drag the sample track
bar to the desired endpoint. GoLive adds the sample in the track content area and displays the corresponding sample
Inspector.
Drag the Create Sample tool (above) to create a new sample (below).
Divides an existing sample into two samples. The resulting samples have identical content, but
Divide Sample tool
their durations are shortened depending on where you divided them. After you select the Divide Sample tool, click
the existing sample where you want to divide it. For example, if you divide a 25-second sample at the 10-second mark,
the result is a sample of 10 seconds and another sample of 15 seconds. You can then drag each sample to the time
interval you want and change its content as necessary.
Sets the end time of a sample to the start time of the following sample if there is a gap between
Glue Sample tool
the samples. After you select the Glue Sample tool, click the first sample. GoLive extends the first sample up to the
start time of the following sample.
ADOBE GOLIVE CS2
530
User Guide