Table of Contents
Advertisement
IRISPen Executive 6 - User's guide
Switch reading mode
This allows you to program the switch to the next reading mode in the
list of reading modes available. See: Basic parameters, Selecting the
reading mode. If the current reading mode is Text, this will make you
switch to the Bar Codes reading mode. If the current reading mode is
Bar Codes, this will make you switch to the Image reading mode.
Remember that the reading mode is always specified in the Status
window.
User String
This allows you to program the addition of a character string. To enter
your key sequence, tick User String, then introduce the character
string in the proposed field and click OK to confirm.
S
ETTING THE TEXT ALIGNMENT
With the Text Alignment feature, you can indicate how the
scanned lines must be delimited. Where should the reading actually
start if a word has been cropped during scanning? How should
hyphens be interpreted when occurring at the end of a line? Should
prefixes or suffixes be added before and/or after the read data?
To set the text alignment:
• Click on
Set the text Alignment in the IRISPen Palette or
select Alignment from the Settings menu.
28
Advertisement
Table of Contents
