Table of Contents
Advertisement
IRISPen Executive 6 - User's guide
Otherwise, you must paste the data manually with the Paste or
CTRL+V command.
P
ROGRAMMING THE PEN BUTTONS
DOUBLE CLICK
Your pen scanner is equipped with two buttons. The simple and
double click of each pen button can be programmed so as to
execute an operation in the target application. By simply
pressing the pen buttons, you will thus be able to execute key
sequences, add characters, switch from one reading mode to
another, etc. without having to touch your keyboard.
The buttons programming is particularly useful, for example, when
entering data into a database: you can program the <Tab> command
to get to the next field and program the <Home><Cursor Down> to
move the cursor to the next row. When entering amounts in a
spreadsheet, you can program the keying of the currency ("$", etc.).
In your word processor, you will program the <Enter> key to make
a carriage return and start a new paragraph, etc. These are only a
few examples...
You can program the single and double clicks of each button, four
operations can be programmed in total.
To program the pen buttons:
• Click on
Program the pen buttons in the IRISPen Palette
or select Pen buttons from the Settings menu.
By default, the buttons are programmed as follows:
Left button:
26
)
(
SINGLE AND
Advertisement
Table of Contents
