Advertisement

Chain Drive Models - C2102, C2202T, C2212T, C2405T, D2101, D2405T
Belt Drive Models - B2202T, B2210T, B2211T, B2212T, B2215T, B2401T,
B2405T, B4505T
Wi-Fi
Garage Door Opener
®
Please read this guide and the enclosed safety materials carefully!
The door WILL NOT CLOSE unless the Protector System® is connected and properly aligned.
Periodic checks of the garage door opener are required to ensure safe operation.
This garage door opener is ONLY compatible with myQ® and Security+ 2.0® accessories.
DO NOT install on a one-piece door if using devices or features providing unattended close.
Unattended devices and features are to be used ONLY with sectional doors.
Attach warning labels to the location indicated on label.
Download the myQ
Open and close your door, get alerts and set schedules from anywhere. Connected smart garage door openers also receive software updates to
ensure the opener has the latest operational features. See page 1.
Easy step-by-step
interactive 3D instructions
for this product can be found in
Download the free BILT App
before assembly
To register your garage door opener to receive updates and offers from Chamberlain, visit chamberlain.registria.com or use the icon below:
CHAMBERLAIN
App to Set Up an Account and Connect
®
1.
Take a photo of the camera icon including
the points (
).
2.
Send it in by texting the photo to 71403
(US) or visit www.chamberlain.photo
(Global).
USER'S GUIDE
FOR RESIDENTIAL USE ONLY
Download the free myQ
®
Monitor and control your garage
from anywhere and get real-time alerts
with peace of mind.
Available on most iOS and Android Devices
®
®
App
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CHAMBERLAIN D2101 and is the answer not in the manual?

Questions and answers

Summary of Contents for MyQ CHAMBERLAIN D2101

  • Page 1 Periodic checks of the garage door opener are required to ensure safe operation. • This garage door opener is ONLY compatible with myQ® and Security+ 2.0® accessories. • DO NOT install on a one-piece door if using devices or features providing unattended close.
  • Page 2: Table Of Contents

    The Timer-to-Close (TTC) feature, the Product Serial Number: myQ® App, and any other myQ® devices are to be used ONLY with sectional doors. Date of Purchase: ®...
  • Page 3: Important Installation Instructions

    Important Installation Instructions IMPORTANT INSTALLATION INSTRUCTIONS To reduce the risk of SEVERE INJURY or DEATH: READ AND FOLLOW ALL INSTALLATION WARNINGS AND Install wall-mounted garage door control: • INSTRUCTIONS. within sight of the garage door. Install garage door opener ONLY on properly balanced and •...
  • Page 4: Important Safety Instructions

    Important Safety Instructions IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of SEVERE INJURY or DEATH: READ AND FOLLOW ALL WARNINGS AND INSTRUCTIONS. ALWAYS KEEP GARAGE DOOR PROPERLY BALANCED. An ALWAYS keep remote controls out of reach of children. NEVER improperly balanced door may NOT reverse when required and permit children to operate or play with garage door control push could result in SEVERE INJURY or DEATH.
  • Page 5: Connect With Your Smartphone

    ® Wi-Fi network using the myQ App before finalizing installation You must set up a myQ® account and connect the garage door opener to Wi-Fi® in order for it to be installed successfully. You will need: • Wi-Fi® enabled smartphone, tablet or laptop •...
  • Page 6 The garage door opener must run through a complete cycle before it will activate Wi-Fi® programming. Download the myQ® App. Set up an account and connect. If you already have the myQ® App installed: Check that your mobile device has the latest software. Download the latest version of the myQ App.
  • Page 7: Programming

    All remote controls and keyless entries are now erased. For Multi-Function Control Panel Erase ALL Devices (Including myQ® enabled accessories) Press the LEARN button on the Press and hold the LEARN button until the LED goes out door control to enter (approximately 6 seconds).
  • Page 8: Operation

    Operation Use an A19 incandescent (100W maximum) or compact fluorescent 26W (100W equivalent) light bulb. DO NOT USE halogen, short neck, or specialty light bulbs. DO NOT USE LED bulbs. To prevent possible SERIOUS INJURY or DEATH from a falling garage door: •...
  • Page 9: Battery Backup

    Timer-to- indicates the battery is fully Close, and remote close features (myQ® App) are disabled. In battery charged. backup mode, the Automatic Garage Door Lock will unlock when the •...
  • Page 10: The Protector System® (Safety Reversing Sensors)

    Operation The Protector System (Safety Reversing Sensors) ® The door will not close if the sensors have not been installed and aligned correctly. When the light beam is obstructed or misaligned while the door is closing, the door will reverse. If the door is already open, it will not Be sure power is NOT connected to the garage door opener close.
  • Page 11: Adjustment

    Adjustment Introduction Your garage door opener is designed with electronic controls to make setup and adjustments easy. The adjustments allow you to program where the door will stop in the open (UP) and close (DOWN) position. The electronic controls sense the amount of force required to open Without a properly installed safety reversal system, persons and close the door.
  • Page 12: Adjustment

    Adjustment - Program the Travel Without a properly installed safety reversal system, persons (particularly small children) could be SERIOUSLY INJURED or KILLED by a closing garage door. • Incorrect adjustment of garage door travel limits will interfere with proper operation of safety reversal system. •...
  • Page 13: Test The Safety Reversal System

    Adjustment - Test the Safety Reversal System - Test the Protector System ® Without a properly installed safety reversal system, persons Without a properly installed safety reversing sensor, persons (particularly small children) could be SERIOUSLY INJURED or (particularly small children) could be SERIOUSLY INJURED or KILLED by a closing garage door.
  • Page 14: Maintenance

    Replace with Cannot connect garage door opener to home Wi-Fi network: only 3V CR2032 Ensure the myQ® Serial number was entered correctly and try again. coin cell battery. The myQ® characters are between A-F and 0-9 only. Pry open the case first...
  • Page 15: Repair Parts And Accessories

    Repair Parts and Accessories To see repair parts or accessories for your garage door opener, identify the model number on the end panel of the opener and visit support.chamberlaingroup.com to download or print the installation manual. Warranty CHAMBERLAIN LIMITED WARRANTY ®...
  • Page 16: Automatic Garage Door Opener Safety & Maintenance Guide

    Automatic Garage Door Opener Safety & Maintenance Guide Garage Door Opener Safety – An Automatic Decision A garage door is the largest moving object in the home. An improperly adjusted garage door and opener can exert deadly force when the door closes –...
  • Page 17 Routine Maintenance Can Prevent Tragedies Make monthly inspection and testing of your garage door and opener system a part of your regular routine. Review your owner’s manual for both the door and door opener. If you don’t have the owner’s manuals, contact the manufacturer(s) and request a copy for your specific model(s). Look for the opener model number on the back of the power unit.
  • Page 20 Chamberlain 300 Windsor Drive © 2023, The Chamberlain Group LLC Oak Brook, IL 60523 All Rights Reserved Chamberlain.com Wi-Fi® is a registered trademark of Wi-Fi Alliance. 114-5851-000 HomeLink® is a registered trademark of Gentex Corporation...

Table of Contents

Save PDF