Power On The Scanner; Set The Scanning Resolution - I.R.I.S. ANYWHERE 2 Manual

Power on the Scanner

Set the Scanning Resolution

The scanning resolution is measured in dpi (dots per inch). The
higher the dpi, the more details on the original will be captured by
the scanner and the higher the quality of the scanned image will be.
However, a higher dpi will also result in a larger image size and
occupy more space on the memory card.
1. Press the Power button. The Power and
Status indicators blink.
NOTE
: For more information on the
indicator lights, refer to Indicators on
page 7.
2. Wait until the Power indicator stops
blinking and then goes off. The Status
indicator will stay on steady, indicating that
the scanner is ready.
NOTE
: Do not insert any original into
the feeding slot when the Power
indicator is blinking; the original will
not be scanned.
To change the scanning resolution, press and
release the Power button. The scanning
resolution changes with each press of the
button, and the color of the Status indicator
will also change according to the resolution
selected:
• Green: 300dpi (normal mode, default setting)
• Orange: 600dpi (fine mode)
Using the Scanner 11